Topic: SECU derby cover (Read 16624 times)

Ultra2010 · « **on:** November 18, 2009, 04:08:09 PM »

Call me petty but dang it, why does the SECU not have the 110 Derby cover like the others? OK, so the floor board may cover it up a tad, but big deal.
So heres the $64,000 question... How do I get one?

If not from HD, does anyone know a good machine shop / engraver that can make one???

Heatwave · « **Reply #1 on:** November 18, 2009, 05:27:39 PM »

Quote from: Ultra2010 on November 18, 2009, 04:08:09 PM

Call me petty but dang it, why does the SECU not have the 110 Derby cover like the others? OK, so the floor board may cover it up a tad, but big deal.
So heres the $64,000 question... How do I get one? If not from HD, does anyone know a good machine shop / engraver that can make one???

Install the "Ventilator" A/C. The same one that's on the CVO Street Glide. It has both "110" and the words "Screaming Eagle" on it. Of course, the main benefit is that you get substantially better flow throw the throttle body than the stock SEUC A/C.

Hoist! · « **Reply #2 on:** November 18, 2009, 05:40:16 PM »

Quote from: Heatwave on November 18, 2009, 05:27:39 PM

Install the "Ventilator" A/C. The same one that's on the CVO Street Glide. It has both "110" and the words "Screaming Eagle" on it. Of course, the main benefit is that you get substantially better flow throw the throttle body than the stock SEUC A/C.

HeHe!!! That's all good, but he's talking about the DERBY COVER!!!

Get a VIN from a bike that has the one you want, and order it from a friendly dealer using that VIN!

Hoist!

Boatman · « **Reply #3 on:** November 18, 2009, 05:42:54 PM »

Quote from: Ultra2010 on November 18, 2009, 04:08:09 PM

Call me petty but dang it, why does the SECU not have the 110 Derby cover like the others? OK, so the floor board may cover it up a tad, but big deal.
So heres the $64,000 question... How do I get one? If not from HD, does anyone know a good machine shop / engraver that can make one???

Wondered the same friggin' thing.

jfh · « **Reply #4 on:** November 18, 2009, 07:24:02 PM »

2009 SERG also came with plain derby cover. Another opportunity for the MoCo to sell you an upgrade.

OhioDave · « **Reply #5 on:** November 18, 2009, 07:34:39 PM »

Quote from: Hoist! on November 18, 2009, 05:40:16 PM

HeHe!!! That's all good, but he's talking about the DERBY COVER!!!

Get a VIN from a bike that has the one you want, and order it from a friendly dealer using that VIN!

Hoist!

I've been thinking about ordering one,,,i didn't know they were VIN protected !! I think HD owes us all one, i'll give them back my musuem ticket.

Hoist! · « **Reply #6 on:** November 18, 2009, 08:18:19 PM »

Quote from: OhioDave on November 18, 2009, 07:34:39 PM

I've been thinking about ordering one,,,i didn't know they were VIN protected !! I think HD owes us all one, i'll give them back my musuem ticket.

They were on the SERK3. They might be available now since 110 engines aren't CVO exclusive thru HD. Not sure on that. A dealer can build you a 110. But the 110 badging used to be CVO exclusive when they came out in '07.

Hoist!

Heatwave · « **Reply #7 on:** November 18, 2009, 08:59:21 PM »

Quote from: Hoist! on November 18, 2009, 05:40:16 PM

HeHe!!! That's all good, but he's talking about the DERBY COVER!!!

Get a VIN from a bike that has the one you want, and order it from a friendly dealer using that VIN!

Hoist!

oops!!

djkak · « **Reply #8 on:** November 18, 2009, 09:37:04 PM »

I may be mistaken, but I don’t believe that the 110 derby cover is a protected part. Try 60709-07A

Ultra2010 · « **Reply #9 on:** November 19, 2009, 12:22:32 AM »

Quote from: djkak on November 18, 2009, 09:37:04 PM

I may be mistaken, but I don’t believe that the 110 derby cover is a protected part. Try 60709-07A

Well now, don't I feel like a jacka$$, Chicago HD @ 20% off, $123.20. No mention of vin restriction but I did not go past just getting the price.

THANK YOU THANK YOU THANK YOU!

Gotta love this Forum! Guess I'll drop Al a thank you for inventing the internet!

Twolanerider · « **Reply #10 on:** November 19, 2009, 12:40:23 AM »

Quote from: Ultra2010 on November 19, 2009, 12:22:32 AM

Well now, don't I feel like a jacka$$, Chicago HD @ 20% off, $123.20. No mention of vin restriction but I did not go past just getting the price.

THANK YOU THANK YOU THANK YOU!

Gotta love this Forum! Guess I'll drop Al a thank you for inventing the internet!

VIN restriction won't show up on Chicago HD's (or others I've noticed) web order systems. Put in the order and, if VIN restricted, they'll contact you after the order to supply the VIN.

NVTHIS · « **Reply #11 on:** November 19, 2009, 02:11:02 AM »

Good find on the Derby Cover.

Trey767 · « **Reply #12 on:** November 19, 2009, 02:31:24 AM »

Quote from: NVTHIS on November 19, 2009, 02:11:02 AM

Good find on the Derby Cover.

I'll trade you the 110 derby i have for your fuel door cover

Heatwave · « **Reply #13 on:** November 19, 2009, 08:59:58 AM »

Anyone have a picture of the 110 Derby cover? I checked the part #60709-07A in the Harley on-line catalog and there's no such part. Could it be vin-restricted since its not in the catalog?

Heatwave · « **Reply #14 on:** November 19, 2009, 09:02:29 AM »

Quote from: Trey767 on November 19, 2009, 02:31:24 AM

I'll trade you the 110 derby i have for your fuel door cover

What fuel door cover?

Ghost Rider · « **Reply #15 on:** November 19, 2009, 09:06:09 AM »

You could get a custom one from someplace like Thunder Road Graphics...

Its cheaper, and its custom.

Ultra2010 · « **Reply #16 on:** November 19, 2009, 09:07:20 AM »

Quote from: Trey767 on November 19, 2009, 02:31:24 AM

I'll trade you the 110 derby i have for your fuel door cover

I took one look at the fuel door, and since it does not lock I changed out the screws to security screws, stars with the post in them. Sure wish that door would of locked.

Ultra2010 · « **Reply #17 on:** November 19, 2009, 09:17:42 AM »

Quote from: Ghost Rider on November 19, 2009, 09:06:09 AM

You could get a custom one from someplace like Thunder Road Graphics...

Its cheaper, and its custom.

WOW, thats nice.

DICKW · « **Reply #18 on:** November 19, 2009, 09:22:38 AM »

Quote from: Ghost Rider on November 19, 2009, 09:06:09 AM

You could get a custom one from someplace like Thunder Road Graphics...

Its cheaper, and its custom.

And adds Character

And different then everyone else

Ultra2010 · « **Reply #19 on:** November 19, 2009, 11:15:24 AM »

Quote from: Heatwave on November 19, 2009, 08:59:58 AM

Anyone have a picture of the 110 Derby cover? I checked the part #60709-07A in the Harley on-line catalog and there's no such part. Could it be vin-restricted since its not in the catalog?

I used Chicago HDs parts web site, dropped in the part number I got a few posts back and it came up. I have not seen a picture, just the list price and then HD Chicago's price.

Heatwave · « **Reply #20 on:** November 19, 2009, 11:31:02 AM »

Quote from: Ultra2010 on November 19, 2009, 11:15:24 AM

I used Chicago HDs parts web site, dropped in the part number I got a few posts back and it came up. I have not seen a picture, just the list price and then HD Chicago's price.

Where did this part # come from if its not in the MoCo P&A catalog? Does anyone even know if this is compatible with a 2010 SE Touring bike? I haven't been able to find pics of this derby cover anywhere? Anyone have a link?

NVTHIS · « **Reply #21 on:** November 19, 2009, 12:26:30 PM »

Quote from: Trey767 on November 19, 2009, 02:31:24 AM

I'll trade you the 110 derby i have for your fuel door cover

Sorry but the door is bad a$$.

NVTHIS · « **Reply #22 on:** November 20, 2009, 01:26:03 PM »

Hey Ultra2010 I found this in another thread. Is this what your looking for.

DICKW · « **Reply #23 on:** November 20, 2009, 01:33:48 PM »

Quote from: NVTHIS on November 20, 2009, 01:26:03 PM

Hey Ultra2010 I found this in another thread. Is this what your looking for.

$ to a Donut says, yes that's what he's looking for.

Heatwave · « **Reply #24 on:** November 20, 2009, 04:34:53 PM »

Quote from: DICKW on November 20, 2009, 01:33:48 PM

$ to a Donut says, yes that's what he's looking for.

I think thats a clutch cover not a derby cover.

Ultra2010 · « **Reply #25 on:** November 20, 2009, 04:45:17 PM »

Quote from: NVTHIS on November 20, 2009, 01:26:03 PM

Hey Ultra2010 I found this in another thread. Is this what your looking for.

I am looking for the 110 derby like the other 2010s have....... BUT that is sharp looking, not a derby but sharp for sure. If I can't find one, I may just have someone make one as exact a copy as they can. I emailed the lazer / engraver someone had posted earlier on this thread but have not heard back from them yet. Just don't know why HD dropped the ball (again) on SECUs............

NVTHIS · « **Reply #26 on:** November 20, 2009, 05:04:37 PM »

Quote from: Ultra2010 on November 20, 2009, 04:45:17 PM

I am looking for the 110 derby like the other 2010s have....... BUT that is sharp looking, not a derby but sharp for sure. If I can't find one, I may just have someone make one as exact a copy as they can. I emailed the lazer / engraver someone had posted earlier on this thread but have not heard back from them yet. Just don't know why HD dropped the ball (again) on SECUs............

You guys are to smart for me, you catch everything. I thought it said derby cover. But the only Derby I know is the Kentucky Derby. lol

djkak · « **Reply #27 on:** November 20, 2009, 05:34:12 PM »

Quote from: Ultra2010 on November 20, 2009, 04:45:17 PM

I am looking for the 110 derby like the other 2010s have.......

60709-07A is the OE piece listed in the 2010 FLHXSE parts book.

Heatwave · « **Reply #28 on:** November 20, 2009, 06:29:18 PM »

Quote from: djkak on November 20, 2009, 05:34:12 PM

60709-07A is the OE piece listed in the 2010 FLHXSE parts book.

Does anyone have a picture of this part that they can post?

09S/E roadglide · « **Reply #29 on:** November 20, 2009, 06:34:44 PM »

Quote from: djkak on November 20, 2009, 05:34:12 PM

60709-07A is the OE piece listed in the 2010 FLHXSE parts book.

I might be crazy but the derby cover is the clutch cover. Its the larger cover on the primary, on the left side ! the points cover is smaller and on the right.

04se103 · « **Reply #30 on:** November 20, 2009, 06:38:37 PM »

That's what I was thinking Rick

djkak · « **Reply #31 on:** November 20, 2009, 07:29:15 PM »

Quote from: Heatwave on November 20, 2009, 06:29:18 PM

Does anyone have a picture of this part that they can post?

How's this?

Ultra2010 · « **Reply #32 on:** November 20, 2009, 07:32:00 PM »

Quote from: 09S/E roadglide on November 20, 2009, 06:34:44 PM

I might be crazy but the derby cover is the clutch cover. Its the larger cover on the primary, on the left side ! the points cover is smaller and on the right.

Does not look like it would line up......... could be wrong (it happens.... often according to my wife) But the part below is not like the 2010s 110 derby cover. $:-\$

djkak · « **Reply #33 on:** November 20, 2009, 07:39:33 PM »

Quote from: 09S/E roadglide on November 20, 2009, 06:34:44 PM

I might be crazy but the derby cover is the clutch cover. Its the larger cover on the primary, on the left side ! the points cover is smaller and on the right.

The derby cover is the clutch inspection cover. Back before 1965 the primary housings were made of sheet metal and the clutch inspection cover looked like a Derby hat; the name stuck.

09S/E roadglide · « **Reply #34 on:** November 20, 2009, 08:07:37 PM »

seriously is not rocket science this is a derby cover. Your bike does not have a inspection cover, that would be at the front of the primary ( the big shiny chrome thingy on the left side or the same side as your clutch. )

09S/E roadglide · « **Reply #35 on:** November 20, 2009, 08:08:47 PM »

this is also a dirby cover.......a very nice one !

Fired00d · « **Reply #36 on:** November 20, 2009, 08:10:40 PM »

Quote from: djkak on November 20, 2009, 07:39:33 PM

The derby cover is the clutch inspection cover. Back before 1965 the primary housings were made of sheet metal and the clutch inspection cover looked like a Derby hat; the name stuck.

Kewl, thanks for the trivia.

Ride Safe,
Fired00d

Ultra2010 · « **Reply #37 on:** November 20, 2009, 08:15:24 PM »

Quote from: 09S/E roadglide on November 20, 2009, 08:08:47 PM

this is also a dirby cover.......a very nice one !

yep, thats the one ghost rider posted earlier, darn nice too. The link he so nicely included in his post was a big help to me. Thanks to everyone for thier assistance. Regards... Ultra 2010

djkak · « **Reply #38 on:** November 20, 2009, 10:44:51 PM »

Quote from: Fired00d on November 20, 2009, 08:10:40 PM

Kewl, thanks for the trivia.

Ride Safe,
Fired00d

Glad to pitch in with a little marginal info from the romantic past.

Fed68 · « **Reply #39 on:** November 21, 2009, 12:26:48 AM »

Here's one on the bike.

Heatwave · « **Reply #40 on:** November 21, 2009, 07:12:23 AM »

Quote from: Fed68 on November 21, 2009, 12:26:48 AM

Here's one on the bike.

Does it come in red or black lettering or did you paint it red?

Ultra2010 · « **Reply #41 on:** November 21, 2009, 12:59:29 PM »

Quote from: Hawg on November 21, 2009, 07:59:49 AM

Is this the cover (borrowed the picture)

Yepper! But now I'm being fickle and thinking about the custom ones................. too many choices! Dang it.

jfh · « **Reply #42 on:** November 22, 2009, 05:03:55 PM »

Part numbers 60709-07A and 60742-10 were not VIN protected. The machine turned ring is a great match for the Silver/Titanium SERG.

Fed68 · « **Reply #43 on:** November 23, 2009, 05:43:20 AM »

Quote from: Heatwave on November 21, 2009, 07:12:23 AM

Does it come in red or black lettering or did you paint it red?

Mine came that way.

1abastarsmda · « **Reply #44 on:** November 27, 2009, 07:52:22 AM »

Quote from: 09S/E roadglide on November 20, 2009, 08:07:37 PM

seriously is not rocket science this is a derby cover. Your bike does not have a inspection cover, that would be at the front of the primary ( the big shiny chrome thingy on the left side or the same side as your clutch. )

Where do I find this "derby cover". I like this one and noone has posted a link to find it.

Boatman · « **Reply #45 on:** November 27, 2009, 08:50:00 AM »

Quote from: 1abastarsmda on November 27, 2009, 07:52:22 AM

Where do I find this "derby cover". I like this one and noone has posted a link to find it.

The part# for the blue lettered one shown is 60827-07 and lists for around $155.00 . Don't know the part # for red lettering but is probably just a number off (60828-07??).

bigmegina · « **Reply #46 on:** November 30, 2009, 12:33:11 AM »

bought 1 off the hd board for $50 shipped.has black 110 number and the ring is polished alum.lettering in the ring says CUBIC INCHES.my 09 serg derby cover was plain.this is a nice touch,matches the air cleaner.dealer told me $150 for derby cover and $21 for ring.

SE66 · « **Reply #47 on:** November 30, 2009, 09:18:39 AM »

Ordered this cover from Chicago Harley. Part #. 60827-07 $123.00. It is not VIN protected.

--------------------------------------------------------------------------------

SE66 · « **Reply #48 on:** November 30, 2009, 09:24:23 AM »

60827-07 Blue Text
60828-07 Red Text

These are for the Screamin Eagle Clutch Cover at Chicago Harley. Just like the 1 above this post. I ordered mine back in the Summer. They are not VIN protected. Just tell them which one you want and give them the old plastic card money number and in about 2 weeks you got it.

Jimmy

Heatwave · « **Reply #49 on:** November 30, 2009, 09:53:46 AM »

Quote from: SE66 on November 30, 2009, 09:24:23 AM

60827-07 Blue Text
60828-07 Red Text

These are for the Screamin Eagle Clutch Cover at Chicago Harley. Just like the 1 above this post. I ordered mine back in the Summer. They are not VIN protected. Just tell them which one you want and give them the old plastic card money number and in about 2 weeks you got it.

Jimmy

Are there any watch-outs for swapping out the clutch (derby) cover? Or is it a straight-forward effort to simply remove the old screws and swap the covers? Can the gasket be reused or is a new one generally needed? Does the cover come with its own new gasket?

Thanks for any advice on making this swap out.

DICKW · « **Reply #50 on:** November 30, 2009, 10:03:21 AM »

Quote from: Heatwave on November 30, 2009, 09:53:46 AM

Are there any watch-outs for swapping out the clutch (derby) cover? Or is it a straight-forward effort to simply remove the old screws and swap the covers? Can the gasket be reused or is a new one generally needed? Does the cover come with its own new gasket?

Thanks for any advice on making this swap out.

I would change the gasket, you have a 50/50 chance of ripping it and or it leaking. Spend the extra dollar two ninety eight.......

Boatman · « **Reply #51 on:** November 30, 2009, 03:26:08 PM »

The newer bikes take a red oring and you have to take the floorboard (passenger) off to get one torx out. Get the right size torx bit, the 09's came out with an impact driver and the 10 came out like they should. On a 09 or 10 bike, I would use over (oring), but that's just me.

NVTHIS · « **Reply #52 on:** November 30, 2009, 04:25:22 PM »

I picked up a new blank Derby Cover over the weekend at the dealership. I want something custom, I really like dogs. I lost my Golden back a few months ago so I'm thinking him face and head.

Chris

SBB · « **Reply #53 on:** November 30, 2009, 04:45:27 PM »

Quote from: SE66 on November 30, 2009, 09:18:39 AM

Ordered this cover from Chicago Harley. Part #. 60827-07 $123.00. It is not VIN protected

Also ordered one today from my dealer.

$125.50

I like the way it looks.

SBB

tennisman · « **Reply #54 on:** November 30, 2009, 07:04:03 PM »

Yeah, Torx screws....they SUCK! The factory had mine so tight that the first time I removed the Derby cover that 4 screws broke using my impact screwdriver. Had to drill and easy-out 'em. Replaced with socket head screws and used Never-Seeze...no issues in 24K miles of primary changes (6 so far). Also, I reused the gasket - same one as original, no leak.
T

porthole · « **Reply #55 on:** December 01, 2009, 10:05:46 AM »

A picture of my derby was requested, so here it is.
Custom made for me by Cat Billet LLC - http://www.billetcats.com/

DICKW · « **Reply #56 on:** December 01, 2009, 10:07:45 AM »

Quote from: porthole on December 01, 2009, 10:05:46 AM

A picture of my derby was requested, so here it is.
Custom made for me by Cat Billet LLC - http://www.billetcats.com/

Nice touch.

porthole · « **Reply #57 on:** December 01, 2009, 10:16:43 AM »

The coloring on both the chain and derby covers is not standard. It is just a "candy" color, basically see through.

I like the way it came out, you can see the mill marks from the engraving and depending on the lighting the reflected color very closley matches either the light cherry (in sun) or the dark cherrry (shade)

NVTHIS · « **Reply #58 on:** December 01, 2009, 12:10:32 PM »

Quote from: porthole on December 01, 2009, 10:05:46 AM

A picture of my derby was requested, so here it is.
Custom made for me by Cat Billet LLC - http://www.billetcats.com/

Thanks for posting, and the web site.

OhioDave · « **Reply #59 on:** December 01, 2009, 04:32:06 PM »

Quote from: porthole on December 01, 2009, 10:05:46 AM

A picture of my derby was requested, so here it is.
Custom made for me by Cat Billet LLC - http://www.billetcats.com/

That is one sweet custom piece !

Author Topic: SECU derby cover (Read 16624 times)

Ultra2010

Ultra2010

Ultra2010

Ultra2010

Ultra2010

Ultra2010

04se103

Ultra2010

Ultra2010

Ultra2010