www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Anyone install handlebar risers on SE Fatboy?  (Read 6669 times)

0 Members and 1 Guest are viewing this topic.

Taildraggerdave

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
  • V-twin Exhaust--the sound of freedom
Anyone install handlebar risers on SE Fatboy?
« on: February 05, 2006, 04:12:39 PM »
Hello,
I'd like to put some small risers on my bike but any hesitant that the factory tach will not have enough wire to move with the handlebars, as well as the remaining wiring in the handlebars.  Anyone already move the bars to a new location?  What problems did you encounter?  
I'm thinking a set of 4" pullback risers either from Kuryakyn or HD would give me a real nice cruise ride but I don't want to have to extend all the electrics in the handlebar, etc.  
Thanks.
Logged
Love my '05

fatboyse2

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 597
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #1 on: February 05, 2006, 04:58:38 PM »
No, but I have looked at possibly installing the HD Bombay bars on my bike,  They are about an inch higher in rise that the stock beach bars and I like th semi drag bar look they provide.
Logged

fatboyse2

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 597
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #2 on: February 05, 2006, 04:58:57 PM »
bombay bars
« Last Edit: February 05, 2006, 04:59:19 PM by fatboyse2 »
Logged

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #3 on: February 07, 2006, 01:51:35 AM »
I have not come across any risers to suit 1 1/4 bars.
I had some custom Tee bars made & found there was enough wire also brake & clutch hoses were fine also

cheers
 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #4 on: February 07, 2006, 01:55:09 AM »
Check this old thread out

http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1130355658

Cheers
 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

tunedse2

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 313
  • 2006 SE FatBoy Autumn Haze
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #5 on: February 08, 2006, 04:20:04 PM »
FatBoyse2- you have to post some pics if you do those...
Logged

fatboyse2

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 597
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #6 on: February 09, 2006, 07:25:22 PM »
There on my "after I pay for the 6-speed I just installed" list.  That and my wife is now interested in getting an Ultra.
Logged

javery

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #7 on: May 01, 2010, 11:18:11 PM »
I have the same bike, did you come up with a solution?
Logged

javery

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #8 on: May 12, 2010, 04:11:25 PM »
Hey, that looks like my bike.  ;D

Ok, instead of putting the risers, I went and got the Wild1 Chubby 560 Handlebars. Has anyone put these on and kept the tach? If so, what lines did you have to replace?
Logged

taffymarsden

  • Newbie
  • *
  • Offline Offline
  • Posts: 7

    • CVO1: 2005 CVO fatboy
Re: Anyone install handlebar risers on SE Fatboy?
« Reply #9 on: February 04, 2011, 04:42:01 PM »
Dave I've just posted elsewhere about this then saw your thread. I had the dealer fit 4" risers but until they were on they didn't realise the tacho couldn't be used so I'm back where I started. There was no problem with the wiring though so you won'gt have a problem there.. If you have any idea of a kit that will lift the bars using the original tacho and clamps I'd be grateful for the info.
Logged
 

Page created in 0.139 seconds with 21 queries.