Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ice6900]

Does anybody have a parts book for a 2007 CVO Springer.

Are the Handlebar Risers one part or two parts?  Ie Riser with a spacer underneath?

I was riding down a sandy zig-zag road down towards a beach restaurant, but unfortunately had to stop on a steep corner and had to lay the bike down on its side, no the handlebars are a little off centre because one of the risers is crushed.

[slimdude]

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?Type=13&make=hdmc&a=618&b=36&c=0&d=-HANDLEBAR-ASSEMBLY

Looks like you might need the riser stud (bottom portion)

[hogdownunder]

Hi Ice,

They are two separate parts.

Looking at your photo, you need to purchase a new spacer (riser stud).

Stud,Handle bar riser: PN: 56968-07

[ice6900]

Thanks guys, quite a complicated set up for a riser.  Parts now on order.

[dlaws01]

Any other damage?

[ice6900]

Any other damage? Luckily the road down to the beach was covered by a layer of soft sand.

I layed the bike down as softly as possible injuring my right shoulder, after almost 2 weeks still has some pain if I lift my arm high, maybe a slight crack of a bone. Havent bothered to get myself checked out.  it will heal naturally.

Bike Damage= Scratch on front indicator lens. Brake Pedal very slightly scuffed but polished out.
Luckily I have the Screaming Eagle Heavy Breather Air Cleaner fitted, so that saved the tank. Just needed a new Rain cover.
Exhaust was protected by passenger foot peg, with wasnt damaged.

Bike now has over 71,000km. so I am not to bothered about signs of useage.