Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All

Author Topic: Boot Marks On Exhaust  (Read 10275 times)

0 Members and 1 Guest are viewing this topic.

mikebehr00

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Boot Marks On Exhaust
« Reply #30 on: December 05, 2010, 12:37:34 PM »

Get the pipe hot and then use a piece of wood. Use the end grain of the board and slide it into the offending melted goo and it will come right off! Very fast and non abrasive.
Logged

Reds

  • Reds
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 113

    • CVO1: FLHTCUSE5
Re: Boot Marks On Exhaust
« Reply #31 on: December 05, 2010, 12:41:04 PM »

easy off oven cleaner
Logged
Life is not a dress rehearsal !

ssls6

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 125

    • CVO1: 2010 CUSE-DARK
Re: Boot Marks On Exhaust
« Reply #32 on: January 16, 2011, 05:05:24 PM »

a hard piece of wood with a clean cut edge, when the pipe is hot rub it off...done this many times.  Once it is down to only a light film, polish with chrome cleaner.
Logged

Ricks903

  • Newbie
  • *
  • Offline Offline
  • Posts: 29
Re: Boot Marks On Exhaust
« Reply #33 on: January 16, 2011, 05:24:40 PM »

Heat it up with a heat gun and wipe it off with a paper towel
Logged

rocrider50

  • Let's Ride
  • Newbie
  • *
  • Offline Offline
  • Posts: 40

    • CVO1: 2011 FLHX SE2 Black Diamond Crimson Tag
    • CVO2: 2008 Ultra 105HP
Re: Boot Marks On Exhaust
« Reply #34 on: January 24, 2011, 06:57:49 PM »

A penny works great, softer than chrome so it won't scratch and takes the boot mark off.  Takes a little work though, two round edges only take a line off at a time.
Logged
Looking for modification tips for the FLHX SE2 if you have any.

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: Boot Marks On Exhaust
« Reply #35 on: January 24, 2011, 08:11:36 PM »

:o Wont that scratch the chrome Brian  :confused5:   How about oven cleaner or brake clean.  :2vrolijk_21:


Steel wool works great and won't scratch the chome...I guess sos is the same, but with soap.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

110tHunDer

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14319
Re: Boot Marks On Exhaust
« Reply #36 on: January 24, 2011, 08:15:46 PM »

Steel wool works great and won't scratch the chome...I guess sos is the same, but with soap.

The soap does most of the work.  Probably has some of the same chemical composition/properties as oven cleaner.  Whatever the reason, it works slick as a whistle with no mess and no scratches.
Logged

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: Boot Marks On Exhaust
« Reply #37 on: January 24, 2011, 08:28:33 PM »

The soap does most of the work.  Probably has some of the same chemical composition/properties as oven cleaner.  Whatever the reason, it works slick as a whistle with no mess and no scratches.

Cool, I'll remember that. I've used fine steel wool for years with great results too.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

KODAGRIN

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 203

    • CVO1: 2008 BLACK FLHTCU/110
    • CVO2: 2010 TS FLHXSE
    • Porkbelliesmc
Re: Boot Marks On Exhaust
« Reply #38 on: January 26, 2011, 12:51:43 AM »

The green scotchbrite pads will scratch the chrome, on the bike or in the house!
Logged
Pages: 1 2 [3]  All
 

Page created in 0.14 seconds with 21 queries.