Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hdbrad03]

Jorge you just want to Y the 3 pin connector? If so I may have one but I'm in Daytona have to wait a week so I can look.

 

    Brad

[amigo Jorge]

Jorge you just want to Y the 3 pin connector? If so I may have one but I'm in Daytona have to wait a week so I can look.

 

    Brad

Mi amigo Brad.......I will there next Saturday. Do you have my cel?

[amigo Jorge]

Look on page 413 of the accessories catalogue. The picture is labled "G". I put one on my 2011 flhxse2 and actually have the tour pak lid spoiler lights hooked to them . the other side of the Y runs my saddlebag lid spoilers. Works perfectly . Part # 70264-94A----------The single end plugs in right under the seat and the other two are for whatever you want such as I did on mine. Good Luck , hope this is what you are looking for.

It looks that that is that I am looking for.....Thanks mi amigo!!

[amigo Jorge]

Carl, great information as always.  Jorge, what lights are you adding?  Let's see a current pic of that gorgeous bike!  Hope you are doing well mi Amigo!

hello mi amigo Craig....how are you doing? Are you going to RibFest? I hope so!! I will see you there!!

[amigo Jorge]

You can make your own using these part nos.:

Pigtail to plug into the TP harness to create two connections:
1. 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required, but they're cheap so buy a couple extra in case you screw-up the crimp--return the unused ones if you like).

2. 73153-96BK (used to create two connectors for TP and SG LED, so buy two. The wire terminals are 73191-96; you'll need six (three in each connector).

Carl

Thanks for the information mi amigo Carl but I will be using the Leather TP (see below) and not the regular king TP....The leather TP doesn't come with any harness.

[amigo Jorge]

This the connector

[amigo Jorge]

Label in the connector. The part number reads 70338-09

[amigo Jorge]

Male connector

[amigo Jorge]

Female ....

[amigo Jorge]

Carl, great information as always.  Jorge, what lights are you adding?  Let's see a current pic of that gorgeous bike!  Hope you are doing well mi Amigo!

Mi amigo Craig. I will be using this TP and I want to add some Custom Dynamics lights so I would need to have those dettachable.....see you soon mi amigo

[Twolanerider]

That's neither the -94 or -04 adapter I just saw mentioned earlier in the thread.  Different type of and size connector. 

Jorge, someone mentioned having something that worked.  Snag it if you can.  Otherwise I've not seen a P&A piece offered by Mother Harley so you'd end up having to make your own. 

Surprising Harley doesn't offer a Y cable for this yet.  Have to know that splitting these light circuits isn't that unusual of a thing.

[Harleypingman]

Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED.  I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.

If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.

Good luck with your project.

Carl

[smiley1049]

The connector is in front of the battery under the seat

[Spiderman]

Didn't think it possible, but this thread has turned "oily"

B B

[jcd520]

Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED.  I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.

If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.

Good luck with your project.

Carl




That harness is there as I have an sesg2 and saw it , I just decided to use the Y harness that I gave the part # for in my above response because it seemed much easier to hook up all my lid spoilers to it. But , yes the tour pak harness is there on the 2011 FLHXSE's.