www.CVOHARLEY.com
CVO Technical => Drive Train => Topic started by: roadrunner on June 27, 2019, 12:08:53 PM
-
Disregard, user error, custom acorn nut does have flats on it.
Must be age related! ;D
Hello All,
I had replaced my toe/heel shifter arms and their spring with longer ones from softbrake a while ago and twice the opposite end shifter lever bolt had worked loose.
This time I made sure that the bolt was cleaned off and blue locktite applied.
Question, softbrake makes a shifter arm to match both toe/heel arm however, I am having issues removing the stock acorn nut on the linkage to arm connection.
Any suggestions, or is it normal to destroy the fastener since its not a normal sided fitting?
#4 in the diagram
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?Type=13&make=hdmc&a=1076&b=18&c=0&d=2015%20CVO%20ROAD%20GLIDE%20ULTRA%20(TA)%20GEAR%20SHIFTER%20ASSEMBLY (http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?Type=13&make=hdmc&a=1076&b=18&c=0&d=2015%20CVO%20ROAD%20GLIDE%20ULTRA%20(TA)%20GEAR%20SHIFTER%20ASSEMBLY)