Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cpm83]

I thought I would post some of the modifications and part numbers for the modifications that I have made on my bike.

I have been able to justify these as " safety and visibility"

These are custom dynamics LED turn signal led inserts. Plug and play... Part number GEN200r-1157-T
This is in running light mode.

Did you need a load equalizer for these brake and turn signal led lights?

[codten]

Does the white ring stay on all the time?   Has anyone commented that it makes you more visible during the day next to the daymaker headlight?   Was this a plug and play or did you need to use a load equalizer?

Thanks for the post and pictures.   

Yes the white ring stays on all the time, and yes it does add a little I the visibility.
They are plug and play ( same connector as oem bulb) and with the can bus system on the 2012 there is no load equalizer required. 

[codten]

Is your headlight original H-D dual headlight? I like black color like you have in it.

This is not the original dual light. This is the day maker led light.

[codten]

Did you need a load equalizer for these brake and turn signal led lights?

No load equalizer is needed with the can bus system on the 2012. I put the same bulbs in my ultra an had to have the equalizer installed as well, but only 1 for both front and rear LEDs.

[cpm83]

Thanks for the info.  I just ordered the same LED lights for my bike.  I see you have zip ties on your saddlebag mounts.....same here!

[codten]

Got to have the zip ties!!!  Although truth be told these are not authentic HD zip ties!.

[Charlie]