www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: Robenrange on February 11, 2018, 09:35:20 AM
-
Found a kit for 14” yaffe monkey bars and all wiring needed but it’s for a 2017 without the heated grips. The guy said I would need a seperate wire for that and might need to clearance the inside of the bars to make it fit. Anyone have any experience with this or can you tell me what wire I will need for the heated grips to work?
Here is the link:
Paul Yaffe 14" Black Monkey Bagger Bars Handlebars 17 Harley Package FLHX/T ABS https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F361999978983
-
The wires needed for heated grips usually come in kit with grips. If you don't install them when you install the others, you'll be in for a fight later IMO. and may have to remove them from the bike again to do it.
-
I had a 17 CVO Street Glide, when I had the 14" Yaffe bars installed I had the CVO limited heated grips installed. So I know the heated grips will fit. Not sure the answer on the wires for them.