www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' Eagle® Electra Glide® => Topic started by: VANAMAL on February 10, 2018, 09:47:12 PM
-
75000 miles. Hope i remember where all the pieces go! Things i noticed on disassembly. Rocker box bolts loose not all but most. No orings in the umbrella vents. Came from factory this way. Sludge in oil pan. Had about 1/2” in pan not sure why always changed oil by 5000 miles. Pistons looked great. Not much carbon but a it was ready i think valve stem seals leaky
-
Sorry Van, that first image was making me motion sick.... :puke:
-
That's better.
Ok, this'll be exciting to watch come back together. :drummer:
-
Thanks i never get the picture thing right!
-
Thanks i never get the picture thing right!
Van, hold the phone sideways when you take the picture......then it'll post right side up.
-
Or could just turn the monitor sideways when viewing... :drink:
-
Or could just turn the monitor sideways when viewing... :drink:
Or lay on his side when he takes the picture. Enough of these - > :drink: :drink: :drink: :drink: :drink: and laying to take the picture will be easy. :huepfenlol2: :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
-
Or lay on his side when he takes the picture. Enough of these - > :drink: :drink: :drink: :drink: :drink: and laying to take the picture will be easy. :huepfenlol2: :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
There is still always the option of printing the picture then just taping it on the monitor however you want it. Gawd, I remember telling MFG that one day and the guy blew (another) gasket. Never mind.... :huepfenlol2:
-
75000 miles. Hope i remember where all the pieces go! Things i noticed on disassembly. Rocker box bolts loose not all but most. No orings in the umbrella vents. Came from factory this way. Sludge in oil pan. Had about 1/2” in pan not sure why always changed oil by 5000 miles. Pistons looked great. Not much carbon but a it was ready i think valve stem seals leaky
I noticed a very slight oil seep from the back of the rocker box on the back jug...50,000 miles on my Bird. I suppose my bolts could be loose too. Is there a tightening sequence to the rocker boxes? I have a manual but not with me at the moment
-
I noticed a very slight oil seep from the back of the rocker box on the back jug...50,000 miles on my Bird. I suppose my bolts could be loose too. Is there a tightening sequence to the rocker boxes? I have a manual but not with me at the moment
Don't know if there is or not. If you go opposing corners then middles you can't go wrong though.
-
There is.Its in the manual or i can post a pic upside down
-
There is.Its in the manual or i can post a pic upside down
Thanks but you don’t have to do that...I’m sure it’s tough to hang upside down just to take a pic. I’ll look at my manual before I start wrenching
-
Sorry Van, that first image was making me motion sick.... :puke:
Good job, my Pumpkin was just at same point, still enjoy that bike
-
Van,
Was the bike performing poorly, or did you just decide that 75k was the time to do it? How was the crank? Mine was locking up and needed a rebuild. Jim had it balanced, welded and pinned.
-
Any upgrades while you have her open?