Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Will '07 Heads and Jugs fit on an '03?  (Read 1250 times)

0 Members and 1 Guest are viewing this topic.

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Will '07 Heads and Jugs fit on an '03?
« on: April 29, 2007, 07:37:57 AM »

Has anyone tried to retro fit the heads and jugs from an '07 to an earlier model TC?  A friend is investigating this option for his '03 88" RK.

Thanks 
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

nidan

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1416
  • Keep the breeze between your knees

    • CVO1: 02 FWDWG3 Stage IV 95 -sold
Re: Will '07 Heads and Jugs fit on an '03?
« Reply #1 on: April 29, 2007, 08:12:32 AM »

my understanding is the intake port is different
Logged
CVO -'02 FWDWG3 Stage IV 95 -sold
'07 FLHX Stage II 103 95hp/111lbs ft
'09 FJR 1300- 145hp /99 lbs ft
2011 Mustang GT 412hp/390 lbs ft

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: Will '07 Heads and Jugs fit on an '03?
« Reply #2 on: April 29, 2007, 11:49:30 AM »

my understanding is the intake port is different

Forgot to mention that he will also change out to the newer '06 + throttle body to accomodate the changes to the intake ports.
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

hogasm

  • Guest
Re: Will '07 Heads and Jugs fit on an '03?
« Reply #3 on: April 29, 2007, 12:02:51 PM »

my understanding is the intake port is different

All we did to make this work on the wifes Street Glide is to purchase new intake flanges and all works fine :2vrolijk_21:

Need to modify my post....her bike is an 06...not an 07...sorry
« Last Edit: April 29, 2007, 12:05:01 PM by hogasm »
Logged

SPIDERMAN

  • Guest
Re: Will '07 Heads and Jugs fit on an '03?
« Reply #4 on: April 29, 2007, 03:43:38 PM »

I believe it you can backfit the 07 heads to any twincam if you also use the 07 intake manifold. If you're having headwork done to them before you install, the shop doing your work should know. I'd check with them before I made plans.

B B
Logged
 

Page created in 0.284 seconds with 22 queries.