www.CVOHARLEY.com

CVO Technical => Intake/Exhaust/ECM => Topic started by: bubtrauma on April 18, 2015, 03:19:59 PM

Title: S&S power dual install issue
Post by: bubtrauma on April 18, 2015, 03:19:59 PM

I am trying to install this header pipe and I am stuck at trying to bolt the pipe to the trans bracket with a hydraulic clutch. It is not possible with the bolt and bracket they give you. anyone with this issue?

Title: Re: S&S power dual install issue
Post by: snowrider13 on April 19, 2015, 08:34:18 AM

Just did one Friday, standard clutch, no issues.

Title: Re: S&S power dual install issue
Post by: bubtrauma on April 19, 2015, 11:26:46 AM

Dam

Title: Re: S&S power dual install issue
Post by: snowrider13 on April 19, 2015, 05:45:09 PM

Give S&S tech line a call...they are very helpful.

Title: Re: S&S power dual install issue
Post by: bubtrauma on April 20, 2015, 09:47:58 AM

Well I got it done and had to use a different bolt and nut. I also called S&S and the dude said he was going to look into the issue.

It will be interesting to hear what he finds......

Title: Re: S&S power dual install issue
Post by: Markyjoe on May 04, 2021, 07:15:33 PM

bubtrauma  so can you explain what needed to done in terms of both and nut??  Size any pics going to be doing the same job.  Thanks

Title: Re: S&S power dual install issue
Post by: Markyjoe on May 04, 2021, 07:20:54 PM

Are we talking about the S&S Power Tune Dual Header System for Harley Touring 1995 - 2008?

Title: Re: S&S power dual install issue
Post by: Twolanerider on May 05, 2021, 09:47:04 AM

Have this on my Road King with a hydraulic....   Nope, never mind.  That bike has a cable clutch.  My bad.  Though I do remember having to fiddle with the bracket spacing a little to make it play nice.  Wasn't a big deal and did require alternative hardware and (maybe) a spacer?  But it wasn't anything difficult to make work.