www.CVOHARLEY.com

CVO Technical => Milwaukee-Eight => Topic started by: MakoCVO on October 11, 2019, 04:37:35 PM

Title: '19 CVO RG - 117 engine upgrade - need advice
Post by: MakoCVO on October 11, 2019, 04:37:35 PM
Hi all...

I've got 4,600 miles on the bike, no issues.  PowerVision/Bassani Head Pipe/SVT Boneshakers. I'm looking for more low-mid range.

I can either 1) add a new cam (Woods 22X) with rods and lifters, 2) A 128 Kit, or 3) Harley Stage 4 w/ported heads, and I would add a better cam.

Any opinions? Looking for torque from 30-70 mph, passing power, and just more balls.  Don't care about top end or max HP.

Thanks!
Title: Re: '19 CVO RG - 117 engine upgrade - need advice
Post by: hd-dude on October 11, 2019, 06:46:22 PM
Biggest bang for the buck is a cam. TTS-150 works very well . Other ideas you have are for making big horse power numbers.
Title: Re: '19 CVO RG - 117 engine upgrade - need advice
Post by: Placey58 on October 19, 2019, 12:48:24 PM
I just had Red Shift 468 installed in my 2019 CVO Limited. All I can say is wow!  I have a Thundermax tuner and CSR 2-1-2 head pipe.
Title: Re: '19 CVO RG - 117 engine upgrade - need advice
Post by: ParadigmGuy on October 19, 2019, 01:20:42 PM
Beautiful bike. From what I've read I'd say go with a torque cam. It'll also give your bike a better grumble.
Title: Re: '19 CVO RG - 117 engine upgrade - need advice
Post by: MakoCVO on October 27, 2019, 11:18:06 AM
I just had Red Shift 468 installed in my 2019 CVO Limited. All I can say is wow!  I have a Thundermax tuner and CSR 2-1-2 head pipe.

I'm between that cam and the Fueling Reaper 465. 
Title: Re: '19 CVO RG - 117 engine upgrade - need advice
Post by: Designflaw on October 27, 2019, 01:53:18 PM
I went with all HD to give it a shot, stage II torque cam, SE tuner w/wide band module, rinehart slimline and 4" slip ons, 99HP 121TQ and its right in the sweet spot your looking for. You'll get better with the power vision and the 117 I would say.

Sent from my SM-G955U using Tapatalk
Title: Re: '19 CVO RG - 117 engine upgrade - need advice
Post by: Davermag on November 07, 2019, 09:53:21 AM
So i have the same bike, and added the SE Turner, SE Header pipe and the SE Street cannons. As I understand it the CVO already has the High Performance cam. So I would recommend the Stage III. $1,695.00 and if your dealer does the Black Fri deals like mine, no labor charged when purchased on Black Fri!!