www.CVOHARLEY.com
CVO Technical => Intake/Exhaust/ECM => Topic started by: motor1 on November 13, 2020, 06:52:48 PM
-
Before I get yelled at, for this thread, I wanted to put it on the TTS master tune thread however Steve hasn’t answered that in almost 7 months. So here is my dilemma. I replaced my GT 6.5 radio with the GTS, so far so good, no problems. Now here’s where the issue is, I have installed the TPMS on my wheels from a 2016 and have the dealer try and install the updated BCM. They cannot get the BCM to except any commands from their shop computer. They have tried a second BCM and still have the same problem. The dealer is trying to work with me but has said they don’t understand why it won’t work. I would love the thoughts (excluding “why did you do the upgrade?”) of some of my extra friends on the site. All I’m trying to do is get a tire pressure reading on my radio.
-
try flashing back to stock [using TTS] from the saved original and then see if the dealer can do it.. ive read several times that with tts you need to flash to stock for the dealer to work on it.
-
Yes, you need to "restore" your original calibration from the TTS interface then have the dealer perform the updates.
-
And for the record.......we don't yell at anybody here. It's all peace, love and cum-by-yaa :P
-
Thank you for the information. I saved the original flash on a thumb drive, so I will load it and SLOWLY ride back to dealer for new BCM install, return home and flash it back. Last question, if I may, can the dealer screw up the BCM install/flash and affect my GTS radio? (I believe the term is “bricking”) as always I appreciate the guidance from the knowledgeable people on this site.