www.CVOHARLEY.com
CVO Social => Other Topics => Topic started by: Newell Ron on April 10, 2021, 05:18:57 PM
-
New member here. Thought I'd ck y'all out. Got a problem with taking my bike to a shop so looking at you guys for an idea. New batt., new batt. cables new starter but (not everytime but most of the time ) the starter will drag the voltage down to nothing. It does start though. Usually if I bump the button first its ok then. Batt. shows 13+ stopped and 14.2 running. I can hear atleast one of the acr's click when I turn the switch on. This things got me buffaloed. 37k miles. Sure would appreciate ideas
Thanks again, Ronnie
-
You said you R2'd the starter. Does that include the starter clutch?
-
Yep the whole assembly.
-
Does the engine start turning over then hit a compression stroke and stop or almost stop then keep going and starts?
Sent from my iPhone using Tapatalk
-
I fixed it !!!. (I think) lol
The ACRs were the only thing I could figure so I put a whole bottle of that concentrated seafoam injector cleaner in a full tank and ran the heck out of it out on I 10 . Its been working fine (knock on wood)..
-
SAAAWEET!
-
Thanks. I appreciate the input.
Ronnie