www.CVOHARLEY.com
CVO Social => New Member Introduction => Topic started by: Vosselman (NL - Europe) on July 30, 2007, 01:25:31 PM
-
Hello,
As I have visited this website a couple of times now and saw some European members with questions I just registered as a new member.
We are European Distributor for DirectLink and Vehicle Diagnostic ScanToolSoftware and for the Variable Pressure Clutch.
We have our own dynamometer with eddy current load brake with double lambda for front and rearcylinder. We use this dyno as a independant test and tuningcenter for both dealers as bikeowners.
If you have questions, please reply to this post or send us an email.
-
laissez les bon temps rouler - from Bourbon St, New Orleans, USA! :drink:
-
Hello,
As I have visited this website a couple of times now and saw some European members with questions I just registered as a new member.
We are European Distributor for DirectLink and Vehicle Diagnostic ScanToolSoftware and for the Variable Pressure Clutch.
We have our own dynamometer with eddy current load brake with double lambda for front and rearcylinder. We use this dyno as a independant test and tuningcenter for both dealers as bikeowners.
If you have questions, please reply to this post or send us an email.
Hi VP and thanks for the information on your Company. There are always loads of questions on here regarding Dyno Tuning, recalibration etc. so it will be good to have you to answer them.
Is your Company in Elburg ?
Nige
-
Yes, company in Elburg
-
Yes, company in Elburg
So you must be about 20 miles (34k) from the Harley Davidson Dealership in Apeldoorn ?
Nige
-
Yes.
-
Hello VP,
I send you the :welcome_005: from FRANCE.
Thanks for your help and your advises :2vrolijk_21:
Best regards
:vrolijk_26: Jacques
-
Welcome to CVO Harley!!!!!! :2vrolijk_21:
-
Welcome :coolblue:
-
welcome from NC USA :2vrolijk_21:
-
welcome aboard :2vrolijk_21:
-
Welcome to site CVO from England
-
Welcome to the site.
-
Hello, and welcome to CVO Harley!!