www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' EagleĀ® Road KingĀ® => Topic started by: ace07fxdl on October 14, 2007, 01:24:13 PM
-
I pick up my 08 SERK this friday. Twilight Blue and Candy Cobalt. The things I'm contemplating doing to the bike are adding a Screaming Eagle 58mm throttle body and Screaming Eagle Heavy breather AC, Rhinehart TD's and a Thundermax. What size is the stock throttle body on the 08 SERK?
-
If I remember right it's 50mm .
Jacques
-
Does this mean that there is a 58mm throttle body available for the 110 this year..And I guess they figured out that the 46mm wasn't big enough for this motor. That mean we all with the 07' 110 motors need to change the throttle body's out for the bigger 50mm. I don't guess there will be a recall for this either.
-
Does this mean that there is a 58mm throttle body available for the 110 this year..And I guess they figured out that the 46mm wasn't big enough for this motor. That mean we all with the 07' 110 motors need to change the throttle body's out for the bigger 50mm. I don't guess there will be a recall for this either.
Yes it is KD.
And unfortunately yes again. I posted this a few months, before they came out with the 58 mm. My top end required a 62 mm. The 46 is too small for sure. But they'll never say anything about that. :o
Hoist! 8)
-
ace, did they sneak the release of the thundermax for 08 past us without telling??????????/
-
Remeber the 08 is fly by wire so they are not interchangeable.
-
Remeber the 08 is fly by wire so they are not interchangeable.
Yes, and the SE 58 mm is only good on the '08. If you want to go bigger than 50 mm on the '07, you need to go aftermarket.
Hoist! 8)