www.CVOHARLEY.com
Custom Vehicle Discussions => 2001 FXDWG2/2002 FXDWG3 => Topic started by: KLars1 on December 17, 2005, 03:38:56 AM
-
Hi All,
I purchased a FXDWG3 about a month ago. I love the bike!! I'll post some pictures soon of my bike. [smiley=banana.gif] This website should be a great place to discuss FXDWG3 specific content.
Anyway, I love most things that came stock on the FXDWG3. However, one thing I want to change is the handlebars. I like the set-up of the stockers with respect to rise, pullback, and width....I like the position they put you in. However, I want to go to a 1 1/4" bar with an internal wiring set-up.
So, what I'm looking for is something very close to the stock bar but 1 1/4" or possibly 1 1/2". Anyone have any suggestions? I saw the picture of Buffy's Carlini Clean Sweeps and they look nice, but I'm looking so something that emulates the stock bar profile.
I checked out Drag Specialities and J&P but didn't see anything that was real close. But, then again, I don't find it real easy to accurately measure the stock width, rise, and pullback on the bar fully installed on the bike.
Any suggestions would be great.
Kevin
-
not sure if this is the same as stock profile or not;
http://www.wild1inc.com/wo500b.html
quite a few guys here run wild-1 bard and have been very happy with them
-
Thanks for the link...I always like to see pics of WG2/3.