www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: lastdegree on October 16, 2010, 01:13:15 PM
-
My spiced rum has finally gone to the dealer for my final 2010 mods. :bananarock:
I plan to update over the next week or so WITH PICS - promise. Here's the list of mods expected this time around:
- Headwinds spotlights and turn signals (Vampire) prompted by Slammr
- Headwinds Bezel (Vampire) and hush about the cost please and thanks Slammr
- Dakota Digital antenna
- Spiced Rum Inner Fairing (really unsure at this point, but feel committed to the group and it's paid for)
- Paul Yaffe 8" (one of two sets) Monkey Bagger Bars
- Arlen Ness Mirrors (wanted PA but have issues with the chrome and US to UK is a long way for returns)
- Braided hydraulic lines (why not std?)
- 19" Black / chrome front wheel and tyre
- Chrome rotors (why not std?)
- Rumble collection saddlebag latch covers
- Final front end chrome components
To recap here's what's been done so far:
- 8" Freedom shield - great. Windsplitter - good, but too small for me
- J&M amp and speakers (Thanks Maladjusted) it rocks
- Vance and Hines HI-Output mufflers
- Vance and Hines Power Duals (Thanks Wheelsnkeels)
- Corbin classic solo seat with passenger, back rest, black flame stitch (thanks JCZ)
- Domestic smoke LED turn signals (thanks HDNIK)
- Kury number plate surround (thanks everyone)
- Badland LED smoke rear tail stop lamp (thanks HDNIK)
- Badland module (thanks HDNIK)
- Drag Specialities bag latch inserts
As you may imagine, what started as a close to $40k bike in the UK has now cost a little more. I'd like to personally thank and blame the following for mods I never knew I wanted nor needed:
- HDNIK
- JCZ
- Wheelsnkeels
- Slammr
- JCZ and oh, JCZ
That's it for now. Be patient. I'm somewhat worried that the inner fairing may be a step too far, but hey, it can always be returned back to black.
Lastly :worthless:
Cheers
-
The inner fairing is NOT a step too far....once you have it you will be glad you did it.
-
The inner fairing is NOT a step too far....once you have it you will be glad you did it.
I agree...........last degree! :2vrolijk_21:
Oh yea..........and you can blame it all on me........I'm use to it. ;D
-
I agree...........last degree! :2vrolijk_21:
Oh yea..........and you can blame it all on me........I'm use to it. ;D
He is.....he set the bar waaay up there for the rest of us....
-
Awsome list!!
-
:worthless:
-
Definitely excited to see the 8" bars. What do they figure the stock bars are?
-
He is.....he set the bar waaay up there for the rest of us....
No question. Who would have thought Harley is missing a CVO mod team member?
-
Definitely excited to see the 8" bars. What do they figure the stock bars are?
I'm not entirely sure, but the stock cables work without any pulling so possibly the same size just forward's rather than upwards. Looking forward to seeing the bars on - quality is A1 and should if lucky look the bomb.
-
stock rise is 7.5" but they dont look as cool
-
Can't wait to see it when the list is done :2vrolijk_21:
-
Whilst the bike's in and the front is close to being off a set of Monotubes will be installed :bananarock:
-
You're picking up steam :orange: Git er dun
Dam$ the JCZ :o
-
You're killing me! :2vrolijk_21: Great mod list. . . . . Can't wait for the pics! :drink:
:worthless:
-
need pics... need pics.. need pics!!
-
We all need pics. The bike's been at the dealer for five days and nothing's been done :nixweiss:
They've promised to send pics as and when the work starts - cannot wait :bananarock:
-
We all need pics. The bike's been at the dealer for five days and nothing's been done :nixweiss:
They've promised to send pics as and when the work starts - cannot wait :bananarock:
Sitting at the dealer for 5 days and no work has been done :confused5: Ouch
-
OMG :o I'd be abusing someone by then? You probably picked up I'm not the patient type? :nixweiss:
-
I have no patience at all. Had a three day meeting in London this week to take my mind off slow work. Now back and firing in calls, could be a visit later. Muppets
-
I have no patience at all. Had a three day meeting in London this week to take my mind off slow work. Now back and firing in calls, could be a visit later. Muppets
I hope they give you the attention you deserve! :2vrolijk_21:
-
Cant wait to see the Captain
-
Is service at the dealerships over there typically slow? When was your appointment for?
You know those of us that have did ours up are all anxious to see the pics of yours just because nobody's really did up a spiced rum to that level.
-
Work has started and should have some pics to share soon.
There's two dealers within a 50 mile radius and my "trusted" is busy and have other things on. Also, you may or may not believe this, but most baggers in the UK are stock or have a few mods so this level of modding has necessitated a higher level operative to undertake works - Whatever.
Sitting waiting. My other half has me busy with chores so it's not like I'd be able to get out and about.
Cheers
-
I've been waiting for someone to "bite the bullet" and do some 8" Yaffe bars so I wouldn't have to be the guinea pig. Cant wait to see them and your input on how the bike handles with the different hand location.
Awesome Mod list...Thanks :2vrolijk_21:
-
Nine days at the dealer. No email. No call. No nothing. Maybe they've lost my contact details? :nixweiss:
Plus the weather's awesome here at the moment and I could be out and about. At this rate my other's going to ask me to detail the fleet.
:coolblue:
-
Nine days at the dealer. No email. No call. No nothing. Maybe they've lost my contact details? :nixweiss:
Plus the weather's awesome here at the moment and I could be out and about. At this rate my other's going to ask me to detail the fleet.
:coolblue:
I think it is time to stop by the dealer to "see how things are going"
-
I know. Add injury to insult they are closed on a monday. Will try to sneak away tomorrow first thing
-
Ouch! I always wonder how people with such poor customer service stay in business?
-
Update. Work starts today - missing in action 19" wheel and brake lines arrived this am.
Not long now folks.
-
First day of work and first picture to share!
Who say's it's only an inch? Looks way bigger IMO and the chrome rotors are a must :bananarock:
-
Best order-up your chrome rotors boys
-
Giddy up
-
Oh hell yeah!
-
:2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Chrome rotors should have been standard!
-
Amen and wouldn't they look better actually on the bike :nixweiss: Jus Sayin?
-
:2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Chrome rotors should have been standard!
That would be one (or 3 in our case) less thing that we would not have to buy and then the MoCo would make less money on us.
-
That would be one (or 3 in our case) less thing that we would not have to buy and then the MoCo would make less money on us.
Yeah that plans working great for them! :nixweiss:
I bought all mine from RC Components and not through a Stealer either. 8)
They wont gey any money from me if theres an alternative. :nervous:
-
Yeah that plans working great for them! :nixweiss:
I bought all mine from RC Components and not through a Stealer either. 8)
They wont gey any money from me if theres an alternative. :nervous:
at least they have a chance to make money on us......if they include them, then there is no chance at all!
-
at least they have a chance to make money on us......if they include them, then there is no chance at all!
They can make plenty of $'s from P & A's for the stock models. The SE models should be a show-case for HD with all these "little" items included. Considering the price they get for these babies. . . . . :drink:
-
They can make plenty of $'s from P & A's for the stock models. The SE models should be a show-case for HD with all these "little" items included. Considering the price they get for these babies. . . . . :drink:
Agreed..but that would not be like them it all.....it would be right :2vrolijk_21:
-
Not even a bike i have seen before and I'm freaking excited looking at that list. LOL :pineapple: :2vrolijk_21:
-
I'm expecting big things today. Pictures of parts ON the bike would be a start. :bananarock:
-
It's official - there's no turning back :bananarock:
-
another horror shot
-
Whoa! Hope they know how to put that thing back together!!
-
I Hollared "Don't Look Ethel" But it was "Too Late" :nervous: :nervous: :nervous:
-
Bar got wired and one very unhappy tech Steve who's installed 12" MBB, but says the 8" are a pig to wire
-
In fact Steve's so pissed off with the job he sent me a message
-
and another - mad as a box of frogs this lad, but knows what's what
-
They'd not seen progressive monotubes before until they opened the box - wow nice looking kit
-
last cheeky shot until tomorrow when the lot goes back together - or they think it is
-
Funny message from the head of service
Hi Adam,
Steve was ready to chuck in the towel, he sends his greetings. LOL
Job has come to a stand still as the progressive paper work shows filling the forks with fork oil with a gravy jug, we are working out whether we should use chicken or onion gravy, and if it should be bisto or tesco own?
would do you reckon?
Chris.
BTW Bisto is a powder based gravy, tesco is like safeway - funny bunch. Hoping they went with Chicken.
-
thx for the pics - and the forewarning of the wrenches mood ;)
-
Funny message from the head of service
Hi Adam,
Steve was ready to chuck in the towel, he sends his greetings. LOL
Job has come to a stand still as the progressive paper work shows filling the forks with fork oil with a gravy jug, we are working out whether we should use chicken or onion gravy, and if it should be bisto or tesco own?
would do you reckon?
Chris.
BTW Bisto is a powder based gravy, tesco is like safeway - funny bunch. Hoping they went with Chicken.
;D
Glad to see your making progress :2vrolijk_21:
A word to the technician the Monotubes get 5 oz of 10W oil and no more or they can hydrolock :'(
the stock Harley units use 9 Oz of 20w and I've heard of them overfilling the gravy :nixweiss: Just a word of caution.
-
and another - mad as a box of frogs this lad, but knows what's what
Bars look AWESOME :2vrolijk_21:
-
All the doubts are going. Really liking the bars also. Braided cables are ordered and fingers crossed Tuesday it's all done. Cannot wait to see the inner fairing on. Plus, we still have Headwinds bezel and spots to go.
-
Ahem Ahem we seem to be short of pictures?
Hell my friend I could've flown over completed the work and posted the pictures for you by now?
They need to stop sipping tea and get to work :nixweiss:
-
Ahem Ahem we seem to be short of pictures?
Hell my friend I could've flown over completed the work and posted the pictures for you by now?
They need to stop sipping tea and get to work :nixweiss:
That's what I'm thinkin......way to slow for my patience level. :nervous:
I think Jim has us Nor Cal guys spoiled.
-
WOW! Tough sight. . . . . :huepfenjump3:
If the weather in the UK is anything like Upstate right now, can't be missing much riding time right now. And remember: GOOD THINGS TAKE TIME! :2vrolijk_21:
Cheers everyone. :drink:
-
The weather here is not great. However, as much as I'm not going to ride the bike, I hate, just hate dumb service.
I'm a self confessed impatient man. I cannot for life of me wait when there's an alternative. The dealer emails to say that they ordered some braided cables and one of them looks to arrive in Europe on the 17th of Nov? Why would anyone order braided cable parts from the US when there's more bike shops capable of making hydraulic lines within 30 miles of the dealer??
It would appear that my bike will be back sometime this year? At this rate, I may move the captain to make way for a nice 911 / 930 turbo...mmmm :2vrolijk_21:
-
I hear you Adam this is the kind of thing that soured me on Harley's dealers. I either do it myself (preferred method) or use an Independent shop.
The Independents seem to have a better grasp of both customer service and what it takes to be in business.
Don't give up my friend in the end you'll get what you want and it'll be splendid! :2vrolijk_21:
Winter has arrived here and looking at the bike as I pull in the garage is killing me each day. We are planning to haul it to Tennessee around the 12th -14th and ride the Dragon and the Cherahola Skyway. During the ugly season we try to go south each month and ride at least a weekend here and there to cure the itch.
-
Wheels - don't get me started. Sunnier climes sound rather nice and looks as though that ride is cool as. I'm off to Madrid this weekend for a week of sun, but no bike
Amazingly, I'd waited to gather all the parts and then I had a three to four weeks for my booking, then they start late, order parts from 4000 miles away and the inform me that it's at least a further 2-3 weeks before the bike comes back AND I bet money they don't even detail the bike. How can a business survive? Who knows what labour cost, no email, calls or timely updates.
Any good indy want to start-up near here - guarantee there's business to be had and kept
I'm signing off until the next pics.
Cheers everyone
-
Sit tight and have a good holiday. :huepfenjump3:
Cheers! :drink:
-
Went to the dealer yesterday and it's nearly complete! Great bunch of guys have a done a stellar job. Should be back within the week and hold on to your wallets peeps - it's just pornographic. The spiced rum inner is a must IMO - the bars are rocking and that's before you see the Headwinds kit up front.
Ooh mama - me likely.
-
Real good. Excited for you to finally have it back.
-
Standing by for launch 8)
-
Thanks to all of you this will be a very expensive winter for me!!! :nervous: :nervous:
.......but thanks!!!! ;D
-
so where are the pics ;D
-
:worthless:
You can't keep us waiting much longer. . . . . The suspense is killing me! :drink:
-
It's killing me. No news is good news my momma said. It's a nice day (in uk) so who knows it may turn up shorty.
Cheers
-
Interesting, and yes I know that without pics this is time wasting, BUT the new 19" front wheel looks killer with the slight drop from the monotubes and makes it look as HD should with the 2011 IMO.
Wheels - did you notice the bike drop slightly at the front when you did your mono's?
-
Interesting, and yes I know that without pics this is time wasting, BUT the new 19" front wheel looks killer with the slight drop from the monotubes and makes it look as HD should with the 2011 IMO.
Wheels - did you notice the bike drop slightly at the front when you did your mono's?
No I cannot say I did there are different spring sets for height available. Is it possible you received a set with the lowering springs? Have the dealer give you the part number installed. The only difference between standard and lowered height is the spring kits in the kit.
I am considering changing them to lower mine out front some to accommodate the 140/70 21.
-
She came back
-
Sorry wrong pic. Women rarely leave and come back.
-
Head winds bezel may have cost the earth, but man alive it makes the front end look awesome - recommended
-
Close up of close to 1k's worth of lights
-
First pic of the inner fairing - I love it
-
Pic giddyness
-
saddle bag covers make it for me anyway
-
Another of the bars and inner - you may just see the braided hoses.
-
Just love how the mirror pop above the fairing. Note the 19" with chrome rotors - weep for me
-
Another
-
Another
-
Rear end
-
SWEET
-
another
-
Last one - cannot wait for the sun to come out for more pics.
-
Fantastic job Lastdegree, the bars are the mutts nuts
Kev
-
:2vrolijk_21: :2vrolijk_21:
Looking good as I knew it would!
-
WOW! Really nice job. Love the lights and bezel. Cheers buddy! :drink:
-
Thanks guys. The things I worried over most turned out the best. The headwinds seemed over priced out of the box - but really do make the front end. The bezel is a work of art. The painted inner is now a no brainer for me anyway.
Keep modding
-
:2vrolijk_21:
-
Super job :2vrolijk_21: Great ideas and a nice looking bike..................
-
The painted inner fairing turned out really nice. Bike looks really sharp. Great job.
-
Absolutely done with alot of creativity, Cheers :smilie_eimer:and stock she is :alcohol:Great job and hope you sleep alot better. :drink: :drink: :2vrolijk_21:
-
I keep sneaking to the garage for extended peek's. mmmm... what now? Chrome starter comes to mind and finally will order the chopped tour pak.
Cheers
-
Addictive isnt it? just came in from the garage myself :nixweiss:
Really like the mods especially the Headwinds lamps, Best passing lamps for a Street Glide IMO :2vrolijk_21: :2vrolijk_21:
-
The lamps really work on the SESG. However, the bezel is by far my best mod - makes the front end look muscular. Always thought the batwing was a great design, just a little too weedy like there was something missing. Now found IMO :2vrolijk_21:
-
A real "custom" ride now.
Congrats on an awesome job. :2vrolijk_21:
I have always loved the look of a colour matched inner fairing that really sets your bike apart from the crowd of other SESG's.
You're definitely on a roll now!
-
Weather's turned cold and salt is officially the new condiment of choice for all asphalt. Bike is safely tucked away for the winter.
Not sure what's next. Chopped tour pak is certain. Maybe new footboard and associated kit, chrome starter? or what? Anyone have any suggestions?
Cheers
-
http://www.dakotadigital.com/index.cfm?ptype=results_w&mode=zoom&image=prd_zm_589.jpg
Best price at Eastern PC on Ebay
http://cgi.ebay.com/ebaymotors/DAKOTA-DIGITAL-RED-DRESSER-6-PACK-GAUGE-KIT-HARLEY-04UP-_W0QQcmdZViewItemQQhashZitem1c1761ddd8QQitemZ120651374040QQptZMotorcyclesQ5fPartsQ5fAccessories
-
I looked at these and JCZ, yes the head of mods said probably NOT with the spiced rum. Not so sure now.
JCZ - any new thoughts on the matter?
-
While they do not offer rum lighting they are s similar shade of Red.
They also offer additional features not the least of wich is the Head temp readout. :2vrolijk_21:
The stock guages are very nice so it is not a necessity? (but then neither is a $499.0 Bezel or temporary Lowers? ;))
I am sure "you" would have no need of the 0 to 60 timer? :nixweiss:
-
I'm all over these - in reality the new floorboards would be a waste of money whereas digital gauges rock :bananarock:
Not sure I'd use any of the features, but when you kick-up the bike it's such a light show.
mmmm.....mmmm...mmm..mmm. Dakota's are my new want
-
I'm all over these - in reality the new floorboards would be a waste of money whereas digital gauges rock :bananarock:
Not sure I'd use any of the features, but when you kick-up the bike it's such a light show.
mmmm.....mmmm...mmm..mmm. Dakota's are my new want
Then the Mental Institue. :drink:
-
I'm all over these - in reality the new floorboards would be a waste of money whereas digital gauges rock :bananarock:
Not sure I'd use any of the features, but when you kick-up the bike it's such a light show.
mmmm.....mmmm...mmm..mmm. Dakota's are my new want
I'm with you on this one you know its safe if JCZ cleared the way first :2vrolijk_21:
-
Then the Mental Institue. :drink:
I tried that...... but when my health insurance co discovered I had a CVO all they said was I probably just needed more chrome.......but unfortunately they wouldn't cover that....... :huepfenlol2: :huepfenlol2:
-
Close up of close to 1k's worth of lights
Those look really nice without taking away from the clean front end! :2vrolijk_21:
-
I looked at these and JCZ, yes the head of mods said probably NOT with the spiced rum. Not so sure now.
JCZ - any new thoughts on the matter?
That painted inner fairing is the icing on the cake. Yes, I think the red DD gauges would top it off very nice.....especially since your stereo is already lit up in red. Then some red LEDs up under your tank shinning down and behind your horn and your air cleaner shinning back on the motor....... http://www.cvoharley.com/smf/index.php?topic=32927.msg681464#msg681464
Oh, and while you're at it..........you better get those calipers chrome plated.... http://www.cvoharley.com/smf/index.php?topic=40248.msg687034#msg687034
Let me know when you got that done........I got some more ideas for you. :huepfenlol2:
-
ABSOLUTELY OUTSTANDING!!!
Inner fairing is MINT!!! Great job Adam! Well thought through, nice cohesive look. You did it right! Man oh man it took long enough though eh?
I'm you took the risk on the rear plate... that UK billboard would wreck the thing IMHO.
-
Thanks JCZ- Dakota order will be placed :2vrolijk_21:
Bucknut - I'm certifiable at the best of times it's this forum that's taken me to a new level :nervous:
Wheels - when you getting a set of digital's? :bananarock:
HDNIK - the spiced inner is a must. The US license plate is worth while dodge and I'm really pleased with the domestic rear lamp - big thanks :2vrolijk_21:
BOARD Members - feeling like the spiced rum TEAM GIMP!
Cheers
-
Wheels - when you getting a set of digital's? :bananarock:
A distinct possibility
-
Lastdegree.....you've definately taken the lead in mods on the Spiced Rum. I think everybody would agree. There has to be a first for every model and in every color and you've certainly taken the spiced rum to the top. :2vrolijk_21:
You've done yours different than mine (Headwinds) and so I have to admire it as well. We're watching this thread! :2vrolijk_21:
-
Sorry wrong pic. Women rarely leave and come back.
Maybe she missed the dogs? LOL. Your bike looks great, good job.
-
Dogs wont put up with consistently updated by minute "Honey Do list"
Really pleased with how it's turned out.
Dakota's are next :bananarock:
-
As soon as I become employed again I'll get mine :2vrolijk_21:
-
I'm due to order. There's no major rush. Bike's not coming out of the garage this side of March.
-
Don't forget the chrome brake calipers. May find it cheaper to have yours chromed, since your bike is setting for awhile. :2vrolijk_21:
-
I'm due to order. There's no major rush. Bike's not coming out of the garage this side of March.
Rode yesterday but probably the last until March as well :nixweiss: Not withstanding a trip to Florida in the mean time?
-
JCZ I'm not so sure on chrome calipers :nixweiss: I'm liking the black calipers and suit the rims IMO
Digitals are a must - JCZ's mod pages are calling me.
Bummer on the weather Wheels, not like the modfather above who's living the dream in CA
-
Oh Yeah, he has it ALL! :) ;) :D ;D 8) ::) :P
-
JCZ I'm not so sure on chrome calipers :nixweiss: I'm liking the black calipers and suit the rims IMO
Digitals are a must - JCZ's mod pages are calling me.
Bummer on the weather Wheels, not like the modfather above who's living the dream in CA
It's been unseasonably cold here.......low of 30 and highs in the mid 40s. But we've still been getting a little riding in. I think of you guys and all of a sudden it's not so cold.
I don't know about living the dream.......I'm wondering if I'm going to be joining the ranks of the unemployed again, in the next few months. :nixweiss:
-
As tough as it's been in the UK and will probably be for a further 12 months at least, there's not as many redundancy stories as you guy's have had in the US.
Sitting here typing wishes of replacement parts for what are already good parts brings home a reality of how lucky we are. There's many who wish for a bike let alone to mod one.
JCZ, Let's hope not. Wheels, Wish you well finding a new role.
Onward and upwards :2vrolijk_21:
-
Being unemployed sure gives you more riding time :2vrolijk_21:
Wish I lived in Florida, Arizona or California? Even Belize or Costa Rica might be allright as well?
Alas poor Yorick
Timing not withstanding mine is my own fault I sold my business in 2006 looking to start a new motorsports venture. Just as it was about to get started the Obama hit the fan :nixweiss:
My 5 year non compete is coming to a close and I'll start up where I left off hopefully. In the mean time I've been wholesaling watercraft and motorcycles for cash but thats been pretty thin the last 2 years. All in all I'm more fortunate than many so stiff upper lip and all that :2vrolijk_21:
JCZ wish you well in that regard! Certainly hope the economy is actually turning around?
-
I love blackadder. Reminds me of when I was younger when my dad and I used to watch it Thursday evenings when the old lady went out on the town with her pals.
Nice to hear it's not all bad. Just gotta love non-compete's. God bless America for that contract. Still love a bit of cash dealing. Really miss the interaction of selling something with an engine.
I've sort of left the CVO in the back of my mind for the moment. 6 inches of snow here is like 8 feet anywhere else.
Trying to talk myself into an Audi R8 which my good lady is warming to.
Cheers,
-
Now your talking I really have been considering the Audi and they are a little less conspicuous to the jealousy crowd. (Employees)
The great unwashed and uninformed masses are less aware of them.
Always get the :2vrolijk_21: from Car & Driver
Still hard to beat the 4matic S Class in the winter but that may be one to do it?
-
Looks like it's a no go. A bit too tight for me at 6'5" and before you say it there's more than 5" elsewhere.
Main issue aside, there's just no space for nothing. Not my best choice of everyday car. Will have to re-think.
Still love my merc's. Fancied one of the C63 until I sat inside. Great engine - pants interior especially for the money.
-
next ride probably the plain old Mercedes S550 4matic :2vrolijk_21:
(although there was a nice CLS 600 AMG in the local trader today reasonably priced just not a great snow machine)
One advantage to being 5'9" is they all "Fit"
-
Here you go. Out of the blue, well not really as I've been looking for one for 10 yrs I found a 1996 Porsche Turbo 993 version. Must have felt right 'cause I pulled the trigger after many hours asking, talking to the dealer - a porsche OPC dealer at that. Imagine a 1996 car with 60k fully warranted and approved by porsche and 4wd!
I've hijacked my own thread for which I apologies. I do however, have news to share tomorrow in that my corbin passenger back rest arrived to replace the std CVO item and looks mighty cool and useful too
Cheers
-
Very nice on both counts - Enjoy
-
Having just spent again on another toy the decision has been made to re-locate the bike to our home in Spain. This way I get to use the porker when it's dry and the bike will get more ride time all year round.
I may be hanging-up my modding plans for while - although sad for some, my wallet is smiling and it's been fun, lots of fun.
Cheers
-
Love the bars. Looks like Yaffe monkey bars. What size please?
-
Painted fairing inner, no brainer looks great.
-
Hey last degree, are those 10 or 12" Yaffee Monkey bars? And what, if any cables did you need to get longer ? I also have the spiced rum and you have done allready what I'm planner for this winter. Just was hoping to see what they'd look like and lo and behold you have it. Are the headwinds lights bright? Thanks.
-
Sick scoot yo! where did you get a hold of the 8" monkey bars? thanks
-
I don't think Last degree will reply as I bought his bike a few months ago.
The mods he did are fantastic and the bike gets a lot of attention where ever I go.
-
you seem to be right - last post was somewhen in march ...
-
Ok then what size Monkies are they 10 or 12" Thank you in advance. :P
-
They are 8 inch, according to the paper work.