www.CVOHARLEY.com

CVO Technical => Twin Cam => Topic started by: tony1968 on May 09, 2004, 10:58:51 PM

Title: gear drive camshaft
Post by: tony1968 on May 09, 2004, 10:58:51 PM

so can you put gear drives on stock cams? so to keep your stock cam

Title: Re: gear drive camshaft
Post by: geezerglide on May 10, 2004, 11:17:55 AM

No way, you have to buy a complete Gear Drive setup, and presently HD does not provide.

Have to go to Wood, S&S to get gear drive cams. Of course, no HD Warranty whatever it is good for.

Title: Re: gear drive camshaft
Post by: JCZ on May 10, 2004, 11:16:32 PM

Geezer is right.  There is a thread or two in here, somewhere about the cams and in particular, the Woods cams and gear drive, with dyno sheet posted.

Title: Re: gear drive camshaft
Post by: the O`Fender on May 17, 2004, 11:38:12 AM

Andrews who manufactures all the gear drive products for S&S and Wood will make you a gear drive cam any grind you like for $500. The engineering is completely different on a gear drive cam setup, the cams actually spin in a counter direction to one another versus chain driven cams spin together in direction so even if you could press a gear on your stock cams the lobes would hit one another and that would probably be a little bit too noisy for most!!! LOL [smiley=7.gif]