www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: amigo Jorge on March 07, 2011, 10:08:59 AM
-
I have tried to find the "Y" Wiring harness for my FLHXSE2. I want to install some lights on the detachable TP so I am needing the Y harness. The local dealer can't help me.
Thanks for your help.
Jorge
-
I have tried to find the "Y" Wiring harness for my FLHXSE2. I want to install some lights on the detachable TP so I am needing the Y harness. The local dealer can't help me.
Thanks for your help.
Jorge
Jorge my friend I have not seen this particular harness adapter for sale from Harley. Worst case scenario is making one yourself. All the connectors and pins are available. Add a crimping tool and a few minutes of your time and any adapter you ever need is within reach.
-
Jorge my friend I have not seen this particular harness adapter for sale from Harley. Worst case scenario is making one yourself. All the connectors and pins are available. Add a crimping tool and a few minutes of your time and any adapter you ever need is within reach.
Thanks mi amigo Don.....I have been having problem getting the connector online. Would you know any place online where I can get it? His is the"the wondering path doing"?
-
Thanks mi amigo Don.....I have been having problem getting the connector online. Would you know any place online where I can get it? His is the"the wondering path doing"?
I've not seen that particular adapter Jorge. Does Harley produce it and, if so, have you got a part number? If not it'll be a make-your-own thing. Not a big deal. Just a bit more hassle.
-
"Switched Circuit Adapter Harness" P/N 70264-94A perhaps ?
B B
-
"Switched Circuit Adapter Harness" P/N 70264-94A perhaps ?
B B
Don't think so Brian. That's the Y adapter for the accessory plug. Jorge is wanting to T off back at the tour pak itself. At least I think that's where he's after.
-
Don't think so Brian. That's the Y adapter for the accessory plug. Jorge is wanting to T off back at the tour pak itself. At least I think that's where he's after.
yes. I will use a dettachable TP but I want to put some light in the rear for braking purposes so I would need that "Y" adapter to have it dettachable......
-
I've not seen that particular adapter Jorge. Does Harley produce it and, if so, have you got a part number? If not it'll be a make-your-own thing. Not a big deal. Just a bit more hassle.
I will take a picture and have posted here. You have a lot of more experience and hopefully you can find out what is the type of connector............Thanks mi amigo
-
Don't think so Brian. That's the Y adapter for the accessory plug. Jorge is wanting to T off back at the tour pak itself. At least I think that's where he's after.
Then maybe the "electrical accessory adapter " P/N 70270-04 ?
B B
-
I think that is correct... I bought one havent yet installed it.. its the Y accessory adapter but I was told you can use it by splitting the taillight connector, and that will keep the TP spoiler light off with the bike in accessory.
Let me check when I get home.. If I can find the invoice that will help.
-
I have tried to find the "Y" Wiring harness for my FLHXSE2. I want to install some lights on the detachable TP so I am needing the Y harness. The local dealer can't help me.
Thanks for your help.
Jorge
Look on page 413 of the accessories catalogue. The picture is labled "G". I put one on my 2011 flhxse2 and actually have the tour pak lid spoiler lights hooked to them . the other side of the Y runs my saddlebag lid spoilers. Works perfectly . Part # 70264-94A----------The single end plugs in right under the seat and the other two are for whatever you want such as I did on mine. Good Luck , hope this is what you are looking for.
-
Are you referring to the Y-harness HD includes in the Air Wing luggage rack LED? Here are the installation instructions, but HD says it's not available for separate sale and doesn't provide a p/n, at least in these instructions:
http://www.harley-davidson.com/en_US/Media/downloads/Service/isheets/-J04669.pdf
I'm 95% sure I saw a p/n for this harness, but can't recall how I came across it.
In any case, I have one that a tech at my local dealership gave me and it worked perfectly for wiring the Ultra run/brake lights with the tour pak spoiler LED (after I changed the connector).
You're welcome to it since I have since installed the HD tour pak run/brake/turn signal conversion kit which uses the rear lighting harness and associated connectors/harness, and the spoiler LED is simply wired to the tour pak harness.
Send me a pm with your mailing address and I'll send it to you.
Carl
-
You can make your own using these part nos.:
Pigtail to plug into the TP harness to create two connections:
1. 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required, but they're cheap so buy a couple extra in case you screw-up the crimp--return the unused ones if you like).
2. 73153-96BK (used to create two connectors for TP and SG LED, so buy two. The wire terminals are 73191-96; you'll need six (three in each connector).
Carl
-
Carl, great information as always. Jorge, what lights are you adding? Let's see a current pic of that gorgeous bike! Hope you are doing well mi Amigo!
-
I bought a Y adapter that had 2 of the 3 connectors needed, cut of the 3rd incorrect one & added the correct one. If you have a good parts guy he can give you the correct connector & the pins.
-
Jorge you just want to Y the 3 pin connector? If so I may have one but I'm in Daytona have to wait a week so I can look.
:bananarock: :bananarock:
Brad
-
Jorge you just want to Y the 3 pin connector? If so I may have one but I'm in Daytona have to wait a week so I can look.
:bananarock: :bananarock:
Brad
Mi amigo Brad.......I will there next Saturday. Do you have my cel?
-
Look on page 413 of the accessories catalogue. The picture is labled "G". I put one on my 2011 flhxse2 and actually have the tour pak lid spoiler lights hooked to them . the other side of the Y runs my saddlebag lid spoilers. Works perfectly . Part # 70264-94A----------The single end plugs in right under the seat and the other two are for whatever you want such as I did on mine. Good Luck , hope this is what you are looking for.
It looks that that is that I am looking for.....Thanks mi amigo!!
-
Carl, great information as always. Jorge, what lights are you adding? Let's see a current pic of that gorgeous bike! Hope you are doing well mi Amigo!
hello mi amigo Craig....how are you doing? Are you going to RibFest? I hope so!! I will see you there!!
-
You can make your own using these part nos.:
Pigtail to plug into the TP harness to create two connections:
1. 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required, but they're cheap so buy a couple extra in case you screw-up the crimp--return the unused ones if you like).
2. 73153-96BK (used to create two connectors for TP and SG LED, so buy two. The wire terminals are 73191-96; you'll need six (three in each connector).
Carl
Thanks for the information mi amigo Carl but I will be using the Leather TP (see below) and not the regular king TP....The leather TP doesn't come with any harness.
-
This the connector
-
Label in the connector. The part number reads 70338-09
-
Male connector
-
Female ....
-
Carl, great information as always. Jorge, what lights are you adding? Let's see a current pic of that gorgeous bike! Hope you are doing well mi Amigo!
Mi amigo Craig. I will be using this TP and I want to add some Custom Dynamics lights so I would need to have those dettachable.....see you soon mi amigo
-
That's neither the -94 or -04 adapter I just saw mentioned earlier in the thread. Different type of and size connector.
Jorge, someone mentioned having something that worked. Snag it if you can. Otherwise I've not seen a P&A piece offered by Mother Harley so you'd end up having to make your own.
Surprising Harley doesn't offer a Y cable for this yet. Have to know that splitting these light circuits isn't that unusual of a thing.
-
Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED. I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.
If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.
Good luck with your project.
Carl
-
The connector is in front of the battery under the seat
-
Didn't think it possible, but this thread has turned "oily"
B B
-
Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED. I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.
If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.
Good luck with your project.
Carl
That harness is there as I have an sesg2 and saw it , I just decided to use the Y harness that I gave the part # for in my above response because it seemed much easier to hook up all my lid spoilers to it. But , yes the tour pak harness is there on the 2011 FLHXSE's.
-
jcd520, your use of the HD accessory harness makes a lot of sense since the connectors with the tour pak and saddlebag spoiler LED's use the same connectors that mate with the harness you purchased.
Thanks for confirming that the SESG2 has the tour pak harness.
Carl
-
jcd520, your use of the HD accessory harness makes a lot of sense since the connectors with the tour pak and saddlebag spoiler LED's use the same connectors that mate with the harness you purchased.
Thanks for confirming that the SESG2 has the tour pak harness.
Carl
You are most welcome. That is exactly why I used it instead of the existing tour pak connector. The Y harness is simply plug and play and much easier to get to when you want to remove the detachable tour pak and run naked.
-
Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED. I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.
If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.
Good luck with your project.
Carl
Thanks mi amigo Carl for your help. I will check as soon as I get back since I am in Panama at this moment. Again, thanks buddy.
-
Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED. I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.
If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.
Good luck with your project.
Carl
That harness is there as I have an sesg2 and saw it , I just decided to use the Y harness that I gave the part # for in my above response because it seemed much easier to hook up all my lid spoilers to it. But , yes the tour pak harness is there on the 2011 FLHXSE's.
Thanks mi amigo. Anyway I will order the part that you suggested so I will have two :huepfenjump3:
-
Jorge, all of HD's fairing model bikes since at least '97 or so come with a "tour pak harness" as part of the main wiring harness, and it is typically coiled up and stored under the left side cover except on Ultras because it is used for the OEM tour pak lighting, and non-CVO Street Glides because it is used for the rear fender fascia tri-bar LED. I haven't checked for that tour pak harness on the SESG2, but if it's there, it will be an easy way to wire the tour pak lights.
If you don't find the info you want for the Y-harness, it's very easy to use the tour pak harness, and fabbing you own mating connector using the part nos. referenced in my earlier post, specifically: 73103-96BK (used to plug into the bike's TP harness. The wire terminals are 73190-96; three required.
Good luck with your project.
Carl
I found it mi amigo Carl....Thanks so much...I love this site!!