www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Road Glide Custom® => Topic started by: +RO@D*R@GE+ on November 17, 2012, 08:28:22 PM
-
I see some of the 2012 cvo rg with the passenger seat removal and no screws showing ...those two big ones holding the leather strap.
question is there a kit to make it flush or something? does anyone have picture of theres with the solo seat so I can see what I'm doing wrong? or do the screws just stay showing?
thanks for any help
http://i181.photobucket.com/albums/x88/rdmphd/soloseat.jpg (http://i181.photobucket.com/albums/x88/rdmphd/soloseat.jpg)
also what is this flush button or cap if you will that people are talking about? that goes in the screw hole of the passenger pillion seat?
I figured out the leather flap that covers the screws but now I'm interested in this button or cap for the pillion screw hole
thanks again guys!!!
-
You should be able to hide them with the rear of the drivers seat. The leather will cover them.
-
You should be able to hide them with the rear of the drivers seat. The leather will cover them.
Yes, what he said. There's a leather flap behind the rider seat. Just pull it up and over the screws. Easy-peasy!
-
I see some of the 2012 cvo rg with the passenger seat removal and no screws showing ...those two big ones holding the leather strap.
question is there a kit to make it flush or something? does anyone have picture of theres with the solo seat so I can see what I'm doing wrong? or do the screws just stay showing?
thanks for any help
http://i181.photobucket.com/albums/x88/rdmphd/soloseat.jpg (http://i181.photobucket.com/albums/x88/rdmphd/soloseat.jpg)
also what is this flush button or cap if you will that people are talking about? that goes in the screw hole of the passenger pillion seat?
I figured out the leather flap that covers the screws but now I'm interested in this button or cap for the pillion screw hole
thanks again guys!!!
the little chrome button is under the passenger pillion it just pushes in
-
Thnks scttgr8 I didnt know that was there.
-
You should be able to hide them with the rear of the drivers seat. The leather will cover them.
Could you show a picture. I've got a 12 CVO Road Glide, and I looked for this leather cover you talk about and I can't seem to figure it out, and it looks ugly with the big bolts showing.
Thanks Jonnierock
-
Not the best picture.
-
do you leave the big twist bolds on or do you take them off and just leave the screws
sorry for the dumb questions
-
yes I leave the nobs on, they get covered by the flap on the rear of the seat.
-
I was concerned with how easy it would be to steal the seat with those twist bolts. Brukus sells a lock kit to replace the twist bolts.
-
I was concerned with how easy it would be to steal the seat with those twist bolts. Brukus sells a lock kit to replace the twist bolts.
X2 :2vrolijk_21:
-
do you guys leave your knob to the pillion seat in or do you just leave the hole open? here's a picture of mine...kinda like it with the knob on
-
take a look at the under side of you seat. There is a little button type cap that you thread into the fender when riding solo.
-
someone told me that but I can't find it..could you get a picture of what it looks like and what it looks like installed on the bike
thanks for the help...I keep hearing that but not sure what everyone is talking about
is it under the drivers seat or the pillion seat
-
do you guys leave your knob to the pillion seat in or do you just leave the hole open? here's a picture of mine...kinda like it with the knob on
So, your question is, "To knob, or not to knob? :nixweiss: That's so Shakespearean. :huepfenlol2:
(I'm obviously not busy enough today.)
-
take a look at the under side of you seat. There is a little button type cap that you thread into the fender when riding solo.
Rich and I went and looked at the passenger seat on my bike and sure enough it was there. It simply pulls out of the seat bottom and pushes into the bike. It is a plastic piece. It is not threaded as I thought it would be.
-
someone told me that but I can't find it..could you get a picture of what it looks like and what it looks like installed on the bike
thanks for the help...I keep hearing that but not sure what everyone is talking about
is it under the drivers seat or the pillion seat
It is under the passenger seat. It looks like something that holds the seat together. It is the only chrome piece under the seat.
-
the little chrome cap under the seat? that just pops off
-
the little chrome cap under the seat? that just pops off
Yes, I tried twisting it and that didn't work. A fingernail under the edge and it pops off.
-
does that look good when you put it on...I would think the cvo knob would look better
-
I think the CVO knob looks funny. But to each his own.
-
I think the CVO knob looks funny. But to each his own.
X2 THE "BUTTON" LOOKS MUCH BETTER! :2vrolijk_21:
-
any one have a picture of the buttom under the seat on? just want to make sure we are looking at the same thing.
thanks