www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' Eagle® Electra Glide® => Topic started by: fos41 on August 20, 2014, 01:54:23 PM

Title: TAIL Light Fuse Blown
Post by: fos41 on August 20, 2014, 01:54:23 PM

Is there anywhere that I can find a electrical schematic for the tail light circuit on my 05 S.E.E.G.? Fuse blows there is a dead short coming in to the fusebox and the harness is good from connector under seat tail light.

Thanks,
Donnie

Title: Re: TAIL Light Fuse Blown
Post by: Twolanerider on August 20, 2014, 02:07:31 PM

I can scan and post it for you later.  Will get it this evening if not before.  Good place to start looking, however, is under the rear fender over the tire.  Harness goes through the back fender behind the battery is in held up above the tire by clips as it goes aft.  Not uncommon that harness gets either damaged by road debris or comes loose and rubs on tire.  Good a place as any to start looking.

Title: Re: TAIL Light Fuse Blown
Post by: fos41 on August 20, 2014, 02:14:59 PM

Hi Two Lane,

I did a quick visual and apears the harness in th erear fender is intact and  doing a continunity test all ok. Appears to be a short from the fuse box toward the power suply to fusebox. I had to leave and go out of town for work and need to spend more time inspecting things.

A electrical schematic would speed things up any help is appreciated!

Thanks,
Donnie

Title: Re: TAIL Light Fuse Blown
Post by: Twolanerider on August 21, 2014, 06:47:40 PM

Forgot this last night; sorry.  Here you go.  Two pages that together make up the main harness and rear.  PDF files attached to this post and the next one.

Title: Re: TAIL Light Fuse Blown
Post by: Twolanerider on August 21, 2014, 06:49:22 PM

And the next page.

Title: Re: TAIL Light Fuse Blown
Post by: fos41 on August 23, 2014, 12:20:48 AM

Many thanks Two Lane!