www.CVOHARLEY.com

Custom Vehicle Discussions => CVO™ Breakout™ => Topic started by: Louie u on October 10, 2014, 11:14:28 AM

Title: 1 1/2 apehangers?
Post by: Louie u on October 10, 2014, 11:14:28 AM

I am looking for 1 1/2 apehanger stepped down to 1 1/4 for the riser. The only thing I can find is BR and they are awesome custom made bars but $600 for bars is a little much. Anyone using BR apes or is there any 1 1/2 apes out there? Thanks

Title: Re: 1 1/2 apehangers?
Post by: Jswerve on October 10, 2014, 12:30:00 PM

Vinditka. Joe custom makes 1.5 bars.

Title: Re: 1 1/2 apehangers?
Post by: Louie u on October 10, 2014, 02:29:00 PM

Thanks checked out site. .very reasonable. .

Title: Re: 1 1/2 apehangers?
Post by: dooinit2u on October 10, 2014, 04:23:56 PM

I think Buky makes a 1.5" bar also.

BR's are worth the money, IMO. and the chrome is show quality. Wels are seamless and very nice bars.

Title: Re: 1 1/2 apehangers?
Post by: Louie u on October 10, 2014, 08:59:41 PM

Yes, Buky does on was looking at them for my Roadglide. ..called said they don't make them for cvo breakout. Thanks though!

Title: Re: 1 1/2 apehangers?
Post by: Jswerve on October 10, 2014, 09:45:27 PM

Quote from: Louie u on October 10, 2014, 02:29:00 PM

Thanks checked out site. .very reasonable. .

Yes reasonable and Joe is a good dude.

Title: Re: 1 1/2 apehangers?
Post by: grayghost731 on October 10, 2014, 11:00:47 PM

CARLINI    :2vrolijk_21:    I have 16's on my CVO Fatboy.   

Title: Re: 1 1/2 apehangers?
Post by: BreakoutOrange on April 02, 2015, 10:48:39 AM

Stock bars are 1 1/4? 
I am wanting to replace my stock bars with something a little taller and that come back more so I am not leaning forward as much in the clam shell position.  So much to choose from! 
Any favorites??

Title: Re: 1 1/2 apehangers?
Post by: zigscvobo on April 02, 2015, 04:09:52 PM

14" Wild1's I just put on look amazing to me. Still waiting to have fuel pump put on under warranty so I dont know how they feel other than sitting.

Title: Re: 1 1/2 apehangers?
Post by: zigscvobo on April 02, 2015, 04:10:45 PM

And mine were just over $200.00.

Title: Re: 1 1/2 apehangers?
Post by: BreakoutOrange on April 03, 2015, 11:26:55 AM

How difficult is to move to apes?  With the electronic throttle controls on the CVO and the ABS stuff behind that panel near the headlight I would guess all the cables would need to be replaced and the wiring extended. I haven't removed the stuff off the bars.  Drilled out holes are needed on the bars?  Factory CVO bars are 1.25?

Title: Re: 1 1/2 apehangers?
Post by: RangerKane on July 23, 2017, 10:41:29 PM

Quote from: zigscvobo on April 02, 2015, 04:10:45 PM

And mine were just over $200.00.

How did the bars turnout zigscvobo?  Pics?

Title: Re: 1 1/2 apehangers?
Post by: Ballz on March 24, 2018, 11:36:52 PM

Did you put the BR bars on. I just order them for my 2014 CVO breakout and I am having issues determining the length of break and clutch lines. These are the bars that I'm putting on. 14" 1.5" dia and necked down to 1.25. Yes they are expensive. Especially when you do the conversion to our low Canadian dollar. This is not my bike but just showing the same apes. Would love to have some help. Hoping to order before hand and not loosing any riding time.