Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RG13]

I ride a 2013 CVO RG.  I want to change the front turn signals to LED.  I already purchased the Custom Dynamics "Dynamic Ringz". I'm getting mixed info regarding the need for a load equalizer.  Some say I need one and others say I don't.  Does anyone have any experience with theses LEDs on there 2013 CVO RG?  Thanks

[havenolife]

all 13 and down need a load equalizer 14 and up do not no experience on a rg though

[mark]

A quick way to check...

Pull out your stock front bulbs and turn on your turn signal and if the rear turn signal stays flashing at the correct rate then you will not need a load equalizer. If the rear turn signal flashes a couple of time and goes into a fast flash then you will need a load equalizer.

[michaelokielee@yahoo.com]

Mine needed a load equalizer!

[RG13]

Thanks for the responses. 

[Jswerve]

RG13 I want the dynamic ringz setup for my '12 CVO. Do you have the part # for the load equalizer?

[RG13]

This is the info for the load equalizer I got off customdynamics.com.  It's the load equalizer I need to run the dynamic "ringz" turn signals on my bike.  Check out there website.

8 Pin Custom Dynamics® SMART Signal Stabilizer Fits Harley Davidson 2010-2012 Street Glide CVO /2009 Road Glide CVO/2012-2013 Road Glide Custom CVO, 2013 Road King CVO(2014-Present HD Do NOT Require a Load Equalizer)Alarm Compatible, No Heat, No Load, 100% Waterproof, Adjustable, Plug and Play5 Year Manufacture WarrantyDimensions: 4.2" x 0.6" x 1.4"Installation InstructionsITEM#: GEN2-SS8 Price: $74.95

[Jswerve]

This is the info for the load equalizer I got off customdynamics.com.  It's the load equalizer I need to run the dynamic "ringz" turn signals on my bike.  Check out there website.

8 Pin Custom Dynamics® SMART Signal Stabilizer Fits Harley Davidson 2010-2012 Street Glide CVO /2009 Road Glide CVO/2012-2013 Road Glide Custom CVO, 2013 Road King CVO(2014-Present HD Do NOT Require a Load Equalizer)Alarm Compatible, No Heat, No Load, 100% Waterproof, Adjustable, Plug and Play5 Year Manufacture WarrantyDimensions: 4.2" x 0.6" x 1.4"Installation InstructionsITEM#: GEN2-SS8 Price: $74.95

Thank you sir...

[skratch]

I ride a 2013 CVO RG.  I want to change the front turn signals to LED.  I already purchased the Custom Dynamics "Dynamic Ringz". I'm getting mixed info regarding the need for a load equalizer.  Some say I need one and others say I don't.  Does anyone have any experience with theses LEDs on there 2013 CVO RG?  Thanks

i've got a 2013 roadglide.  i first put the dynamic ringz on without a load equalizer.  sometimes they would work fine, othertimes, they would flash fast.  other times, i would get a constant security light on in the speedo.  once i installed the signal stabilizer, i had no more issues, and have had no issues since.

jswerve, you're gonna want the signal stabilizer, gen2-ss8.  from cd its $74.95.  but if you want to save a few bucks, email jon horton from horny toad hd and ask him for an online price.  jon.horton@hornytoadhd.com

[Jswerve]

jswerve, you're gonna want the signal stabilizer, gen2-ss8.  from cd its $74.95.  but if you want to save a few bucks, email jon horton from horny toad hd and ask him for an online price.  jon.horton@hornytoadhd.com

You sir, are THE MAN. Thank you very much. That's what this site is all about. 

[Jswerve]

Thanks to Skratch just ordered the Dynamic Ringz and SS8 load eq for a combined $140 and some change from Jon Horton at Horny Toad. Thank again. 

[03Lightningrocks]

I do believe this will solve my problem as well. Thanks.