Topic: Lurker since 2007.... (Read 1994 times)

1atom12 · « **on:** May 19, 2015, 03:03:52 PM »

Heya guys and gals... I joined the forum in 2007 but shortly after decided to go down to the dark side and bought a Victory Vision... Until that point, I had been on Harleys my entire life... The Rushmore project has brought me back into the fold and I purchased a HC CVO Street Glide last week. I absolutely LOVE this motorcycle! DX headpipe, TTS and Rineharts on Thursday. I'm also going to buy several of Fullsac's baffles to play around with the stock cans. Attaching a pic even though you guys have seen the bike a million times...

Oh, and if anyone knows how to adjust the low and high beams up a bit on my Daymaker headlight, I would very much appreciate it. I searched all over the forum and found info about 25 feet, top of beam and headlight height, etc, but no actual instructions on how to physically adjust the beam itself on the Daymaker..

Super stoked to be here and back into the Harley family!

9 1/2 Beers · « **Reply #1 on:** May 19, 2015, 03:30:04 PM »

Welcome

Marty

Fired00d · « **Reply #2 on:** May 19, 2015, 04:06:03 PM »

Welcome ~~to the site~~ from lurking glad to have you ~~join us~~ posting.

Ride Safe,
Fired00d

Classic45 · « **Reply #3 on:** May 19, 2015, 04:12:55 PM »

Welcome from - Moss - Norway!

MIKEYTEE · « **Reply #4 on:** May 19, 2015, 04:50:29 PM »

Congratulations on your new CVO and Welcome back to the site from The Lowcountry of South Carolina!
I know you have read about these and I hope this may be of interest to you.
Attending a GTG is the best way to get to know the members and put a face to those screen names. Many a lasting friendship have come out of these GTG's,
So. if you want to meet people, ride some awesome roads, kick back and have fun, come to one or all of the GTG's. ( For the newbies out there, GTG = Get Together )
Make your plans now and avoid the rush. In other words, stop pondering and get a hankering and make reservations and attend.
See ya'll there.
The GTG's are in the event section of the board.

Again Welcome
Mike

kiro · « **Reply #5 on:** May 19, 2015, 04:51:25 PM »

Welcome back!

Skillet · « **Reply #6 on:** May 19, 2015, 06:05:03 PM »

Welcome back from South Korea. Congratulations on a good looking ride.

sadunbar · « **Reply #7 on:** May 19, 2015, 06:45:29 PM »

Welcome to the site!

Glad you have joined us...

Mano · « **Reply #8 on:** May 19, 2015, 06:54:59 PM »

Welcome from Toronto, Canada.

phato1 · « **Reply #9 on:** May 19, 2015, 08:15:07 PM »

Congrats on the new bike and the promotion from "lurker"

jamnflhxse2 · « **Reply #10 on:** May 19, 2015, 09:01:58 PM »

Welcome from northern Illinois, congrats on the CVO SG! As far as the daymaker goes, remove the small phillips screw from the bottom of the trim ring then the trim ring lifts up and off. Behind the trim ring are the adjustment screws they have small springs on them. That's the adjustment. Ride safe.

martys · « **Reply #11 on:** May 19, 2015, 09:07:43 PM »

Welcome to active membership on the site, from Southern Ontario, Canada

dooinit2u · « **Reply #12 on:** May 19, 2015, 10:14:31 PM »

Welcome to the CVO Site from

CAJUN COUNTRY

...

South Louisiana.

Jswerve · « **Reply #13 on:** May 19, 2015, 10:16:17 PM »

Welcome back.

Robmay · « **Reply #14 on:** May 19, 2015, 10:35:26 PM »

Quote from: MIKEYTEE on May 19, 2015, 04:50:29 PM

Congratulations on your new CVO and Welcome back to the site from The Lowcountry of South Carolina!
I know you have read about these and I hope this may be of interest to you.
Attending a GTG is the best way to get to know the members and put a face to those screen names. Many a lasting friendship have come out of these GTG's,
So. if you want to meet people, ride some awesome roads, kick back and have fun, come to one or all of the GTG's. ( For the newbies out there, GTG = Get Together )
Make your plans now and avoid the rush. In other words, stop pondering and get a hankering and make reservations and attend.
See ya'll there.
The GTG's are in the event section of the board.

Again Welcome
Mike

Absolutely! Can't wait to see you Mikey at Ribfest! Needin sum o dat apple pie!

bisounours · « **Reply #15 on:** May 20, 2015, 02:42:58 AM »

Good morning 1atom12

on the CVO website

I send you the

from FRANCE

Best regards

Jacques

Breakout · « **Reply #16 on:** May 20, 2015, 04:01:19 AM »

To this forum and the CVO bunch

from the Netherlands.

BALIS · « **Reply #17 on:** May 20, 2015, 05:11:10 AM »

Welcome from Brussels,Belgium.

D-N-D · « **Reply #18 on:** May 20, 2015, 05:38:23 AM »

Welcome from PA !!!

Cross threaded · « **Reply #19 on:** May 20, 2015, 03:39:13 PM »

Congrats on the new bike!

BritGuy · « **Reply #20 on:** May 20, 2015, 10:47:08 PM »

I do like that colour on the SG! Welcome from Vernon, British Columbia.

RonandJanet · « **Reply #21 on:** May 21, 2015, 02:28:54 PM »

Congratulations and welcome from GA.

Smee · « **Reply #22 on:** May 21, 2015, 09:42:46 PM »

welcome from Melbourne Australia

kustomhd66 · « **Reply #23 on:** May 23, 2015, 01:30:42 AM »

Welcome from Finland

ChopperPilot · « **Reply #24 on:** May 23, 2015, 11:22:05 AM »

Welcome from St. Louis.

tweeter13 · « **Reply #25 on:** May 23, 2015, 08:44:56 PM »

Welcome from Ohio

ONE2BAJA · « **Reply #26 on:** May 25, 2015, 06:29:45 AM »

Welcome back from So. Iowa!

green machine · « **Reply #27 on:** May 25, 2015, 09:25:02 PM »

Welcome to the site from Minnesota!! Glad to have ya!!

Author Topic: Lurker since 2007.... (Read 1994 times)