Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[+RO@D*R@GE+]

heard a V&H 2 into 1 high output....sounded great on a 2016 ultra. do they make a false side?
great sound and make pretty good numbers on the dyno from stock.

[Ridgerunr]

I know they have high output duals, not sure about the "falsie". Those HO duals have a lot of volume. I'd be concerned about low end TQ without a fairly "hefty" motor.

[Scott7d]

I think the 2-1 version may be called the Pro Pipe. My friend has a Pro Pipe on a Yamaha. The end is identical to the High Output.

[hrdtail78]

They don't have a false pipe advertised but you can buy each component separately.  One could buy another muffler and the cross under pipe for the SS power duel set up and make their own.  With the cross under.  You would be able to mount it to back of transmission.  It wouldn't be cheap.

I have this pipe.  Right now it is one a 124 set at 11.4:1 with a 266E.  It was on a 124r set at 11.2 and 662-2.  Both were softer on the bottom than a X-series TH.  It also has a sag in the TQ right around 4000-4500.  This same sag shows up on a 103 with 555tqster.  So, I don't really know what kind of volume needs to be put through this pipe to make it work.  I pulled the muffler and stuck a SC-4 ST muff on it.  Fixed the low end.  Haven't been able to play to much to see top end results.

[turn_key]

Bassani makes a pseudo muffler that matches their 2 into 1 system.

[KC2GIW]

Had this pipe on my built 103 - and knew a local guy that put one on a built 120R - we were both unimpressed by the performace.

The sound was nasty, however.

[Ridgerunr]

They don't have a false pipe advertised but you can buy each component separately.  One could buy another muffler and the cross under pipe for the SS power duel set up and make their own.  With the cross under.  You would be able to mount it to back of transmission.  It wouldn't be cheap.

I have this pipe.  Right now it is one a 124 set at 11.4:1 with a 266E.  It was on a 124r set at 11.2 and 662-2.  Both were softer on the bottom than a X-series TH.  It also has a sag in the TQ right around 4000-4500.  This same sag shows up on a 103 with 555tqster.  So, I don't really know what kind of volume needs to be put through this pipe to make it work.  I pulled the muffler and stuck a SC-4 ST muff on it.  Fixed the low end.  Haven't been able to play to much to see top end results.

That's very good information and testing on your part. Thanks for posting it.