Thank you, I will give it another try tomorrow and see if I can get it to go out. If anyone knows the button sequence to capture error codes off the speedo I would appreciate it if you’d let me know what buttons to press simultaneously on this model. I looked on YouTube and mostly they described it but using the older ignition switch on the fork lock which mine doesn’t have.
Thanks again
What you are describing is normal if it goes out when you start to move However,
1.Press and hold the trip Odometer trigger switch on the left Grip while turning the ignition switch on.
2.Release the Trigger button and the word Diag should appear in the Odometer window.
3.Quickly press trigger to toggle between the different computers on the bike and if a Y is present then there are codes.
4.To read the codes just Long Press while the Computer with the Y is on the display.
5.Press and hold while a code is displayed to clear it.