We put a Screamin Eagle compensator in it.
Turned out the clutch is fine, it was just the compensator.
After that, noticed belt was done, really tore up.
Replaced belt with stock Harley part.
My buddy did the work.
First ride was fine for 15 minutes, then started making noise. Lots of noise. Like belt was shredding. Like tumbling rocks in a can.
Took bag off. I noticed adjustment was way back on axle, like a stretched out old belt. Odd for new belt.
My buddy has an 07 FLHX so we compared. His rear pulley is a half inch larger in diameter than mine, and solid mounted.
Mine is not solid mounted.
I know I don't have the original wheels, now I am pretty darn certain it isn't the original pulley.
Frankenbike I think.
Anyway, I saw some stuff about this "tumbling rocks" sound when searching, and stuff about installing the 2008 IDS mount for the pulley.
Our original thought was to go back to the original pulley, now I read about IDS...so not sure.
At the moment I do not know if the stock front pulley is on it or if the gear ratio in the primary is stock. I'll have to dig into all that.
Any thoughts, suggestions, advice, etc in these matters will be appreciated.
.