Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Springer Risers  (Read 611 times)

0 Members and 1 Guest are viewing this topic.

paulb7743

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
    • NY

Springer Risers
« on: August 08, 2020, 08:05:41 AM »

Hey guys , going to be putting a set of 16" apes on my 2008 CVO Springer . The person who had the bike before me put a set of drag bars on it with aftermarket ( I believe ) risers that are about 7-8 " in height . I'm going to use a set of OEM Harley Risers I got off ebay plus a set of Springer studs I'm getting from ebay also .
My question is will the threads for the studs that screw into the forks be the same on my CVO as they would on another FXST Springer , like an earlier year ??
I would love to find a set of original CVO risers , but good luck with that I guess !
I also want to use the same grips and switches I have now , so I assume the bars must be 1" diameter where the grips are ?
Thanks in advance for any input .
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50153
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Springer Risers
« Reply #1 on: August 08, 2020, 09:56:36 AM »

The link below is to an online parts manual source.  Is a great tool for looking up parts and to use for comparison of one to another to see if something is the same or not.


http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
Logged
 

Page created in 0.232 seconds with 20 queries.