Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: yaffe bars  (Read 1396 times)

0 Members and 1 Guest are viewing this topic.

smkymtnboy

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2734
    • TN

    • CVO1: flhxse
    • CVO2: flhtcuse5
    • CVO3: flhtcuse6
yaffe bars
« on: January 19, 2021, 01:09:12 PM »

  wanted to add yaffe bars to my street glide and my quote came to roughly $950.00. no labor included! :o  my first thought was no way. is my thinking wrong.
Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: yaffe bars
« Reply #1 on: January 20, 2021, 07:06:10 AM »

The Yaffe 14" bars I put on my 17 CVO Street glide were right at 400 or so if memory serves me. 

I think bars and installation was 1000, maybe 1100.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

Cvostu

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5128

    • CVO1: 2023 Whiskey Neat road glide custom
    • CVO2: 2019 Mako Shark Fade road glide custom
Re: yaffe bars
« Reply #2 on: January 20, 2021, 06:38:50 PM »

I bought my bars for about 400.00    I paid 150.00 for the labor on a cvo rg.     I was told my guy gets about 50.00 more for a bat wing.   Those are a little more work.  Find an indy.  Shouldn't be much more than that.    Stuart.
Logged

joe98

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 67
    • ON


    • CVO1: 2012 FLHXSE3 CVO
Re: yaffe bars
« Reply #3 on: January 23, 2021, 03:40:29 PM »

Unfortunately, the Yaffe bars (and all of his products) on the higher end of the scale when it come to aftermarket improvements.  I know several people who claim that trying to pull the wires through yaffe apes can be a real challenge.  As the op said try to find and Indy or a friend and service manual....patience and a box of beer go along way.....🍺
Logged

smkymtnboy

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2734
    • TN

    • CVO1: flhxse
    • CVO2: flhtcuse5
    • CVO3: flhtcuse6
Re: yaffe bars
« Reply #4 on: January 24, 2021, 09:32:20 AM »

Unfortunately, the Yaffe bars (and all of his products) on the higher end of the scale when it come to aftermarket improvements.  I know several people who claim that trying to pull the wires through yaffe apes can be a real challenge.  As the op said try to find and Indy or a friend and service manual....patience and a box of beer go along way.....🍺
i can install the bars. no problem there. my quote was 499.00 for 12 in bars. the installation wire cables banjo fittings etc came to 379.00 . then i think 80.00 my for the handle riser clamp. 20.00 for poly bushing. 35.00 for heat shrink.   :o
Logged

kevin_n

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 326
  • www.CVOHARLEY.com
    • WI

    • CVO1: 2016 SESG
Re: yaffe bars
« Reply #5 on: January 30, 2021, 05:23:13 PM »

That seems high just for bars. I think you can buy the bars prewired for 500. I have read a lot of bad stories of trying to wire the yaffe bars, my Indy also said they are a pain to wire but as long as you take your time it should be ok.
Logged

BigLock

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 738
  • CVO1 2012
    • NC


    • CVO1: 2012 FLTRXSE
    • CVO2: 2018 FLTRXSE
Re: yaffe bars
« Reply #6 on: January 30, 2021, 07:59:55 PM »

Yep I have a set on my 12 RG the inside of they are a pain to run wires Thur. I getting ready to change they out with KST. Yaffe bars are not that good of quality for the price. I pulled the KST off my 18 and replaced them with a set of Cordovas out of Calif.
Logged
 

Page created in 0.246 seconds with 21 queries.