Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[2019CVONH]

Good morning,

Has anyone built a 131 stroker using this crank? If so what were your inerds and what were you numbers like? I’m thinking of doing this to mine.


Sent from my iPhone using Tapatalk

[HD Street Performance]

Would you really when you can get either 126" or 130" depending on if you now have a 107 or 114/117 now and no crank needs to be purchased?

[2019CVONH]

I need to redo the bottoms end because the cam side is at .010 runout. So I have to replace the crank anyway. So to be able to change some things up and get more cubic inch I can stroke it and get even more without stressing the motor with thin sidewalls and sleeve issues.


Sent from my iPhone using Tapatalk

[HD Street Performance]

If it were mine I would have the crank fixed or buy a P3R. I prefer less stroke and larger bore. The spigots and the main liner are not thin. S&S cylinders bored +.030 OS.
https://www.facebook.com/P3R-Flywheels-1395670874091175/

[2019CVONH]

I don’t have a Twincam it’s an M8


Sent from my iPhone using Tapatalk

[HD Street Performance]

P3R makes cranks for both, any stroke you want., carrillo USA rods. Plus Darkhorse and Hyperformance, Randy Torgeson, are reworking the stock cranks for the M8

[2019CVONH]

Wish I knew that before I sent it out. It’s getting an S&S pinned and pressed balanced removed


Sent from my iPhone using Tapatalk

[2019CVONH]

If it were mine I would have the crank fixed or buy a P3R. I prefer less stroke and larger bore. The spigots and the main liner are not thin. S&S cylinders bored +.030 OS.
https://www.facebook.com/P3R-Flywheels-1395670874091175/

Wow I went to the Facebook site. That crank is a polished work of art! Very nice indeed.


Sent from my iPhone using Tapatalk