Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: s/s 475 cam install  (Read 602 times)

0 Members and 1 Guest are viewing this topic.

laylonlor

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1022
  • I love YaBB 1G - SP1!
s/s 475 cam install
« on: January 29, 2021, 07:19:07 PM »

475 ss  cam  on 114  m/8 , I'm  hearing this  is way way to go on a stage 2 , v/h slip ons , with no cat. and air box mod. , tts tuner , what hp and tq,, would I expect?, I think now I have around 80 hp and 100 tq. thanks  in advance  :drummer:
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3002
Re: s/s 475 cam install
« Reply #1 on: January 30, 2021, 09:26:45 AM »

This is not a twin cam, its an M8. Local shop just did a RS468 on a 107 and it made 104/129
Logged

laylonlor

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1022
  • I love YaBB 1G - SP1!
Re: s/s 475 cam install
« Reply #2 on: January 31, 2021, 02:19:16 PM »

thanks
Logged

laylonlor

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1022
  • I love YaBB 1G - SP1!
Re: s/s 475 cam install
« Reply #3 on: January 31, 2021, 02:22:56 PM »

 I see someone  had a 118 and a 131 tq. on the  m8  114 :drummer:
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3002
Re: s/s 475 cam install
« Reply #4 on: February 01, 2021, 02:17:01 PM »

And that dyno was on a dynojet 250i with winpep 8 corrected to SAE standard? There are always dynos that will look great or at least have peak numbers that rings the bells. Then looking at the curves they look like junk or they are using another or no correction factor. Happy dyno, short answer.
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6707

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
s/s 475 cam install
« Reply #5 on: February 01, 2021, 03:25:40 PM »

Here is a Dyno with the 475 cam



On the dyno sheet
M8,114,ss475,stock bike

Vance and hines power duals
Vance and hines muffler
Stock throttle  and injectors.
« Last Edit: February 01, 2021, 06:41:57 PM by Unbalanced »
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3002
Re: s/s 475 cam install
« Reply #6 on: February 01, 2021, 09:34:34 PM »

Nothing to say bad about that, very impressive for what we used to call a stage 2
Logged
 

Page created in 0.113 seconds with 20 queries.