Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3  All

Author Topic: New DIY project begins  (Read 2217 times)

0 Members and 1 Guest are viewing this topic.

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3909

New DIY project begins
« on: February 16, 2021, 10:03:41 AM »

I have this to sort out a connect up for the new upgrade cylinder head and oil cooler high flow fan system I'll be making. I'm installing this to be ready for this summer. I had made a head cooling unit before but this time I've bumped up the air flow  from 145 cfm to 253 cfm on the rear cylinder and 212.6 cfm on the front cylinder. 
I'm putting a 253 cfm air flow fan on the rear because of the rear cylender running hotter then the front cylinder.
Also installing a 212.6 cfm fan to the oil cooler.

The parts are slowly arriving just got an email today that two of the 3 fans are on route (had to order from two separate places) Can't make the support bracket for the fans until they arrive. 
So I'll wire up the relays and get it ready for when the fans are mounted then it'll be a plug and play.
I put the switch on the left side heat deflector.
I'll post as things progress
« Last Edit: February 16, 2021, 10:07:17 AM by longlast »
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50015
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New DIY project begins
« Reply #1 on: February 16, 2021, 12:12:32 PM »

Be careful Pete, get that much air blowing in a crosswind across the cylinders and the bike will change lanes all on its own!
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3909

Re: New DIY project begins
« Reply #2 on: February 16, 2021, 12:29:49 PM »

Be careful Pete, get that much air blowing in a crosswind across the cylinders and the bike will change lanes all on its own!

🤣🤣 thanks for the heads up there Don,...I'll have to ride with a right hand lean ta counteract the side drift. BTW,...its the ditch I's  got to watch out for being on the left and all.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50015
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New DIY project begins
« Reply #3 on: February 16, 2021, 12:40:31 PM »

🤣🤣 thanks for the heads up there Don,...I'll have to ride with a right hand lean ta counteract the side drift. BTW,...its the ditch I's  got to watch out for being on the left and all.

Put one fan on each side of the bike.  If they don't counteract you can at least do down the road doing donuts!
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3909

Re: New DIY project begins
« Reply #4 on: February 19, 2021, 09:20:14 AM »

IT seems my 07 Ultra was not fortunate enough to have the EITMS function implemented in to the ECM.  :-\
Logged

Eqcons

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3786
  • A Harley isn't just for Christmas, it's for LIFE!

Re: New DIY project begins
« Reply #5 on: February 19, 2021, 11:19:43 AM »

IT seems my 07 Ultra was not fortunate enough to have the EITMS function implemented in to the ECM.  :-\

Are you sure???  I'm pretty sure my 07 had it, Pete!
Logged
'14 FLHTKSE
'94 Ford Escort Cosworth, 320BHP & just 19,000 miles, owned since new
'17 Ford Focus RS
'21 Toyota GR Yaris

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3909

Re: New DIY project begins
« Reply #6 on: February 19, 2021, 11:40:28 AM »

Are you sure???  I'm pretty sure my 07 had it, Pete!

 :nixweiss:  I did the throttle roll back (ign on) and there was no indication of anything (mind the motor was not running and it was cold).
If it dose have the feature am i missing something?
Logged

Eqcons

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3786
  • A Harley isn't just for Christmas, it's for LIFE!

Re: New DIY project begins
« Reply #7 on: February 19, 2021, 11:49:18 AM »

:nixweiss:  I did the throttle roll back (ign on) and there was no indication of anything (mind the motor was not running and it was cold).
If it dose have the feature am i missing something?

Yep, you haven't had to sit in traffic for 5 minutes!  :D

Hazy memory of mine now, but I'm not sure the turn-on-by-throttle thing was there before the wethead motors.....  There's no fan or pump to run, so I wouldn't imagine you'd notice anything unless the motor was running and it was hot.  Maybe I'm mistaken, of course, but I thought I could remember my 07 turning the rear cylinder off when stationary in traffic queues...
Logged
'14 FLHTKSE
'94 Ford Escort Cosworth, 320BHP & just 19,000 miles, owned since new
'17 Ford Focus RS
'21 Toyota GR Yaris

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50015
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New DIY project begins
« Reply #8 on: February 19, 2021, 11:51:50 AM »

Are you sure???  I'm pretty sure my 07 had it, Pete!

My recollection is that the 07 bikes had to get a (then) free dealer flash to enable the function.

Ok, just found this in an old bulletin:

On 2008 model Touring models produced after December 3, 2007 the EITMS is already installed
Logged

Eqcons

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3786
  • A Harley isn't just for Christmas, it's for LIFE!

Re: New DIY project begins
« Reply #9 on: February 19, 2021, 11:52:00 AM »

Read this thread, Pete:

https://www.hdforums.com/forum/touring-models/1286324-eitms-years.html

Mine definitely had it enabled when it came I think - no recollection of having to have it enabled. (Again, memory not what it used to be though...)

Jim
Logged
'14 FLHTKSE
'94 Ford Escort Cosworth, 320BHP & just 19,000 miles, owned since new
'17 Ford Focus RS
'21 Toyota GR Yaris

Eqcons

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3786
  • A Harley isn't just for Christmas, it's for LIFE!

Re: New DIY project begins
« Reply #10 on: February 19, 2021, 11:53:26 AM »

My recollection is that the 07 bikes had to get a (then) free dealer flash to enable the function.

Ok, just found this in an old bulletin:

On 2008 model Touring models produced after December 3, 2007 the EITMS is already installed

Ah, mine must have been produced after that, Don.
Logged
'14 FLHTKSE
'94 Ford Escort Cosworth, 320BHP & just 19,000 miles, owned since new
'17 Ford Focus RS
'21 Toyota GR Yaris

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3909

Re: New DIY project begins
« Reply #11 on: February 19, 2021, 01:44:04 PM »

It would seem (typical) mine didn't get the free Dealership flash to enable the function. Doesn't surprise me either the dealer I got mine from sold my bike as an 08 to me in 2011(second owner) it was registered in 08 they neglected to say it's an 07, it wasn't known to me for sometime later when I found it was an 07.
I'll have to check into the Dealership and see if they may just still do the install for the function.

I'll hit them up on what the link says about the free install.  Who knows!!

https://www.hdforums.com/forum/touring-models/1286324-eitms-years.html

Meanwhile I'm carrying on sorting out the fan wiring  :alcohol:
« Last Edit: February 19, 2021, 01:48:59 PM by longlast »
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50015
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: New DIY project begins
« Reply #12 on: February 19, 2021, 02:18:47 PM »

Ah, mine must have been produced after that, Don.

My bikes are so old they can't even spell EITMS.  The old FXR can't even spell EI. 
Logged

Eqcons

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3786
  • A Harley isn't just for Christmas, it's for LIFE!

Re: New DIY project begins
« Reply #13 on: February 20, 2021, 05:56:44 AM »

My bikes are so old they can't even spell EITMS.  The old FXR can't even spell EI.

 :D :D :D
Logged
'14 FLHTKSE
'94 Ford Escort Cosworth, 320BHP & just 19,000 miles, owned since new
'17 Ford Focus RS
'21 Toyota GR Yaris

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3909

Re: New DIY project begins
« Reply #14 on: February 21, 2021, 03:02:42 PM »

Relays wired into the switches
Logged
Pages: [1] 2 3  All
 

Page created in 4.361 seconds with 20 queries.