Topic: SE Cams (Read 1002 times)

Korazu · « **on:** February 27, 2021, 03:09:15 PM »

Well, I just finally picked up the girl from getting the cams switched out to Woods-T7H, pushrods, lifters and a Dyno. Bike has 13.5k miles and this is what the SE cams looked like. I've only had it serviced up until now at the HD shops, but he said that was caused by not enough oil to cause the flat spots/rubbing. We were hoping to pull them out and sell them to someone else, but not now.

Loving the bike now as it feels totally different. Dyno numbers next.

Korazu · « **Reply #1 on:** February 27, 2021, 03:09:57 PM »

Dyno numbers.

busarealfast · « **Reply #2 on:** March 01, 2021, 06:58:01 AM »

The numbers are higher on a 103 on the fuel moto site.

pudgeyxj · « **Reply #3 on:** March 01, 2021, 11:44:55 AM »

I run the same cams, rides like a different bike I bet. I got 103/117 with Zippers tensioners, Fueling lifters, and a D& D Fat Cat exhaust.

Paul

Author Topic: SE Cams (Read 1002 times)

Korazu

SE Cams

Korazu

Re: SE Cams

busarealfast

Re: SE Cams

pudgeyxj

Re: SE Cams