Topic: Keystone Aux LED (Read 571 times)

fxmiller1 · « **on:** April 10, 2021, 07:48:28 PM »

I can't seem to find the correct part number for the Keystone Aux LED between the saddle bag and fender.
part number 67801080 fitment reads that it doesn't fit 2014 Ultra Limited CVO.
Not sure why. It seems all I have to do is remove the vanity cover covering the light bracket and install.
Does anyone know if this part number works for my bike or indeed I need another?
I should have asked at the dealership but I assumed it was universal for the Ultras.

fastfreddy · « **Reply #1 on:** April 10, 2021, 07:53:17 PM »

check out Custom Dynamics . they will have whatever your looking for ... good products

Twolanerider · « **Reply #2 on:** April 10, 2021, 08:54:43 PM »

Look up OE parts online yourself at the following link:

http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

It's a good online parts tool be be aware of. I don't remember a keystone shaped auxiliary LED light on the filler panel that year though. Is the light your asking about either a Harley P&A accessory or an aftermarket accessory? If so you're not going to find it in a parts manual for your bike.

Twolanerider · « **Reply #3 on:** April 10, 2021, 09:01:30 PM »

Ok, I got curious. Keystone LED are a P&A accessory. The kit part number that covers both sides is 67800589A. The part kit can be looked at online here:

https://www.harley-davidson.com/us/en/shop/Electra-Glo-Keystone-Auxiliary-LED-Run-Brake-Turn-Lamps/p/67800589A

From that page the image below is the exploded view and bill of materials from which you can get all the part numbers.

fxmiller1 · « **Reply #4 on:** April 10, 2021, 09:24:29 PM »

Twolanerider,

You are correct, this is H-D accessory.
I think the HD site must have an error.
If I change the bike type to 2014 CVO Limited instead of Ultra limited. It reads that neither 67800589A nor 67801080 fits.
I think 67801080 may have replaced 67800589A. I bought 67801080 so I may do the dry fit test.
The mounting bracket for the Keystone LED is behind the filler plate. So I believe that I just discard the filler plate and
mount the Keystone LED on both sides as in installation instructions.

fxmiller1 · « **Reply #5 on:** April 10, 2021, 09:30:03 PM »

Thanks for the reply with information

Twolanerider · « **Reply #6 on:** April 10, 2021, 10:05:35 PM »

Glad to help. Here is the same image from above but cropped better to make it easier to find the part numbers.

Author Topic: Keystone Aux LED (Read 571 times)

fxmiller1

Keystone Aux LED

fastfreddy

Re: Keystone Aux LED

Twolanerider

Re: Keystone Aux LED

Twolanerider

Re: Keystone Aux LED

fxmiller1

Re: Keystone Aux LED

fxmiller1

Re: Keystone Aux LED

Twolanerider

Re: Keystone Aux LED