Topic: FXDWG3 Stock Fork Size and Rake - Looking to replace with STORZ CERIANI 55MM INV (Read 1563 times)

vjtaz · « **on:** June 05, 2007, 10:54:47 AM »

Hello,

I am looking at replacing my Stock Forks on my FXDWG3 with STORZ CERIANI 55mm INVERTED FORKs and was wondering what the stock Fork Length and Rake were. I like the look of my current fork rake and want to keep it the same.

Has anyone installed CERIANI forks?

Do you have Pictures?

Thank You,

VJTAZ

nidan · « **Reply #1 on:** July 06, 2007, 07:30:17 PM »

34 degrees of rake , although some documentation mistates it at 36. 41 mm tubes.

Ceriani makes great forks , the 55 inverted would be nice . I had a WG3 for almost 3 years.

With heavy fork oil and a 90/90 Avon Venom I never felt the need for much more up front , you may consider a fork brace.

Hoist! · « **Reply #2 on:** July 06, 2007, 07:42:51 PM »

Ooh I'd love to throw one of those on my FXWG! Sweet front ends! Someday.

Vjtaz, Storz will know what length if you're keeping it stock geometry. Good luck with it. Let's see some pics when you're done!

Hoist!

Author Topic: FXDWG3 Stock Fork Size and Rake - Looking to replace with STORZ CERIANI 55MM INV (Read 1563 times)

vjtaz

FXDWG3 Stock Fork Size and Rake - Looking to replace with STORZ CERIANI 55MM INV

nidan

Re: FXDWG3 Stock Fork Size and Rake - Looking to replace with STORZ CERIANI 55MM INV

Hoist!

Re: FXDWG3 Stock Fork Size and Rake - Looking to replace with STORZ CERIANI 55MM INV