www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Spoliers  (Read 1689 times)

0 Members and 1 Guest are viewing this topic.

miker

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8710

    • CVO1: 2009FLHTCUSE4
Spoliers
« on: July 27, 2007, 02:37:24 PM »
Well, I got the bags back with the spoilers installed I just don't know where to wire them too?
Any help is always appreciated.  Thanks in advance.

Miker
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50546
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Spoliers
« Reply #1 on: July 27, 2007, 02:50:08 PM »
Spoilers should have been supplied with an intermediate harness that connects at the accessory connector just forward of the battery.  Will come from there back to both saddlebags.  The saddlebags' interior harnesses will come through their inboard sides (yeap, drill a hole in the bags) at a point that will allow the two harnesses to mate.
Logged

Ghost Rider

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2465
  • EBCM # WHORE

    • CVO1: 2011 FLHXSE2 Kermit
    • CVO2: 2015 Victory Ness Magnum #31 of 299
    • CVO3: 2013 Can-Am Spyder RTS
Re: Spoliers
« Reply #2 on: July 27, 2007, 03:37:47 PM »
Quote from: miker on July 27, 2007, 02:37:24 PM
Well, I got the bags back with the spoilers installed I just don't know where to wire them too?
Any help is always appreciated.  Thanks in advance.

Miker

Hey Mike!   :worthless:
Logged

BayouBiker

  • Patriot Guard - HOG - ABATE
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2113

    • CVO1: '07 Cherry Jester 110"
    • CVO2: '99 FXDWG 96"
    • CVO3: 'BSR'
    • photos by Tiki Tom
Re: Spoliers
« Reply #3 on: July 27, 2007, 04:17:05 PM »
A little off from your main point, but I just had the spoilers installed by a local dealer and the service tech didn't put washers on the bolts to attach them through the saddle bag lids. So, I'm waiting on new spoilers & possibly new lids due to the bolts cracking the top side and popping the paint.

The wires were run along with the power lock wiring with the plugs next to each other.

(Yes, thats more rain on the 'Lil Mermaid')

Logged
Live - Love - Ride
         :-*

Guardian Angels are everywhere! When they don't have wings, I call them friends.

miker

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8710

    • CVO1: 2009FLHTCUSE4
Re: Spoliers
« Reply #4 on: July 28, 2007, 01:07:07 PM »
I broke down and read the directions...Not too hard
Logged

magicl1

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 427
Re: Spoliers
« Reply #5 on: July 29, 2007, 01:31:05 AM »
Quote from: Twolanerider on July 27, 2007, 02:50:08 PM
Spoilers should have been supplied with an intermediate harness that connects at the accessory connector just forward of the battery.  Will come from there back to both saddlebags.  The saddlebags' interior harnesses will come through their inboard sides (yeap, drill a hole in the bags) at a point that will allow the two harnesses to mate.

You can also add the "Wig Wag" to have the spoiler lites toggle back and forth a couple times before they go on steady.
Logged
Supertrapp 2:1 and SERT

SOKOOLJ

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 903
  • FLHRSEI.ORG

    • CVO1: FLHRSE3
Re: Spoliers
« Reply #6 on: July 29, 2007, 08:23:12 PM »
Quote from: miker on July 28, 2007, 01:07:07 PM
I broke down and read the directions...Not too hard
Hey Miker, what are those?   :ROFLOL:
Logged

miker

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8710

    • CVO1: 2009FLHTCUSE4
Re: Spoliers
« Reply #7 on: July 29, 2007, 09:01:40 PM »
Quote from: SOKOOLJ on July 29, 2007, 08:23:12 PM
Hey Miker, what are those?   :ROFLOL:

Those silly paper things that come with expensive stuff you but for a HD from HD...

Another beeyatch...My bud tells me my rear light is out, brake light ok...I get home and I takes the cover off expecting to change the bulb and find the mount plate is cracked...factory direct...If these are hand picked best of HD assembling theses bikes, god bless us all.  No continuity to the socket, oh boy I love troublshootin electrical problems like I love root canals.

Miker
Logged
 

Page created in 0.129 seconds with 21 queries.