Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[UltraCVO]

Hi I was wondering if anyone had removed there foot boards to increase the available lean.

I am finding I am scraping the boards far too much for comfort. has anyone any other ideas apart from slowing down.  [smiley=laugh.gif]

Sean

[reo]

Hi I was wondering if anyone had removed there foot boards to increase the available lean.

I am finding I am scraping the boards far too much for comfort. has anyone any other ideas apart from slowing down.

[Cannibus_Man]

hey  ya Reo,
mount some  titanium where they wanna scrape, that will throw off some killer sparks.
 i have  that stuff all over the shop at work. mabye ill  rig something up   [smiley=nixweiss.gif]             [smiley=laugh.gif]

[porthole]

sounds like something to rig and "make available"

[reo]

hey

[UltraCVO]

I am fitting chrome forward controls to alleviate the problem [smiley=1syellow1.gif]

[AUSSIE_FLSTFSE]

I am fitting chrome forward controls to alleviate the problem [smiley=1syellow1.gif]

hows the scraping going? I also fitted forward controls & am still scraping

[UltraCVO]

Well I got a big improvement on the left side, unfortunatly I have V+H Big Radius pipes and it is those that scrap now.

I also increased the rear shock preload by 3 turns and that has also helped.

The only thing left is to fit stock shocks with lowering bolts, I found some that can also raise the back end 1" and lower it 2 1/2". I cannot remember who makes them ATM, but will post when I get the info.

Hope that helps. [smiley=1syellow1.gif]

[AUSSIE_FLSTFSE]

Well I got a big improvement on the left side, unfortunatly I have V+H Big Radius pipes and it is those that scrap now.

I also increased the rear shock preload by 3 turns and that has also helped.

The only thing left is to fit stock shocks with lowering bolts, I found some that can also raise the back end 1" and lower it 2 1/2". I cannot remember who makes them ATM, but will post when I get the info.

Hope that helps. [smiley=1syellow1.gif]

Cheers Mate. [smiley=beerchug.gif]