www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Shifter Pawl, remove and replace. Anybody done this?  (Read 7427 times)

0 Members and 1 Guest are viewing this topic.

CVOwner

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1027
Shifter Pawl, remove and replace. Anybody done this?
« on: September 25, 2008, 03:19:10 PM »
I finally ordered the extended rear shifter from Sik shift, ) i saw them at AZ bikeweek last spring and have decided to give it a try. My stock rear shifter vibrated off some time ago and the shaft/pawl needed replacement before I could put a new one on. So, I got the shaft, looks pretty easy, set screw and run it through. Has anyone on here replaced theres? Anything to look out for? Thanks boys!
Logged
2004 SEEG Orange/Black
When all is said and done, there'll be more said, then done!

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #1 on: September 26, 2008, 05:05:35 PM »
Not hard but go buy a manual. The bible will help you through it and it even has pictures!!!!!

Just kidding. Nothing to look out for. Just have the right tools and take your time. Then sit back and DRINK and ADMIRE!!!!!!

Be Safe

THE DAWG
« Last Edit: September 26, 2008, 05:07:31 PM by DCFIREMANN »
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #2 on: September 26, 2008, 07:08:08 PM »

The only thing special I do with a splined shaft is to tape the splines before I run them through something like a seal.  Just a little insurance against nicking anything.  I use one wrap of electrical tape.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

CVOwner

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1027
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #3 on: September 26, 2008, 07:22:04 PM »
Quote from: DCFIREMANN on September 26, 2008, 05:05:35 PM
Not hard but go buy a manual. The bible will help you through it and it even has pictures!!!!!

Just kidding. Nothing to look out for. Just have the right tools and take your time. Then sit back and DRINK and ADMIRE!!!!!!

Be Safe

THE DAWG
Dude,
YOu got 5 bikes? And you live in DC? Please tell me your not a politician!  :nervous:
Logged
2004 SEEG Orange/Black
When all is said and done, there'll be more said, then done!

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #4 on: September 27, 2008, 06:09:55 AM »
Quote from: CVOwner on September 26, 2008, 07:22:04 PM
Dude,
YOu got 5 bikes? And you live in DC? Please tell me your not a politician!  :nervous:

Now who said I had 5 bikes??????

Nope not a POLITICIAN, just a BIG CITY FIREMAN that works toooo many jobs!

Be Safe


THE DAWG
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #5 on: September 27, 2008, 06:11:26 AM »
Quote from: grc on September 26, 2008, 07:08:08 PM
The only thing special I do with a splined shaft is to tape the splines before I run them through something like a seal.  Just a little insurance against nicking anything.  I use one wrap of electrical tape.Jerry

Yep good idea JerRy. I also put just a little white lube around the edge of the seal to help it slide!!!!!!

Be Safe

THE DAWG
« Last Edit: October 02, 2008, 11:03:15 PM by DCFIREMANN »
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6708

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #6 on: September 28, 2008, 05:41:01 PM »
Quote from: DCFIREMANN on September 27, 2008, 06:11:26 AM
I also put just a little white lube around the edge of the seal to help it slide!!!!!!

Be Safe

THE DAWG

Dawg,

What you do in the privacy of your garage should stay there  :huepfenlol2:
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #7 on: September 28, 2008, 08:20:17 PM »
Quote from: Unbalanced on September 28, 2008, 05:41:01 PM
Dawg,

What you do in the privacy of your garage should stay there  :huepfenlol2:

 :orange: :orange: :orange: :orange: :orange:

Be Safe

THE DAWG
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #8 on: October 02, 2008, 10:03:00 PM »
Quote from: Unbalanced on September 28, 2008, 05:41:01 PM
Dawg,

What you do in the privacy of your garage should stay there  :huepfenlol2:

Classic!   Let's Roll
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

AXIL

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2579
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #9 on: October 02, 2008, 11:06:13 PM »
easy now ,,,,,i spent last week end at dawgs. and will be there this week end and he never asks me to turn my underwear around back wards ,,honest.    axil
Logged
I CAME INTO THIS WORLD WITH NOTHING AND I GOT MOST OF IT LEFT  
AHH,MOONSHINE THE OTHER WHITE MEAT

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #10 on: October 03, 2008, 08:59:04 AM »
Hell yea I am looking forward to this weekend. It will be a great weekend to ride. I may even ride the SPARE EAGLE!!!!! And leave the white lube at home!!!!


Be Safe

THE DAWG
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

Classic Beast

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 535
    • BC

    • Bob McImages
Re: Shifter Pawl, remove and replace. Anybody done this?
« Reply #11 on: October 06, 2008, 12:00:54 PM »
Teflon tape also works good on the splines as its thinner than electrical tape. The only thing you have to watch out for is the pawl spring adjustment it will cover it in the manual but I just make sure it's centered.
Logged
2012 Road glide ultra 103
DD7 Baker, S&S 570, Fulsac DX, 2"
SE CNC heads 58mm throttle body
95 FLSTN
127" Ultima
DD6 Baker
3 X PM 6 piston calipers
S&S Clutch
Lindal Ceramic discs
RB Black Hole pipe
Thunderstar mags
6 gal tanks
Custom Chrome front end
Rear chain drive
150WW Avon Venom rear tire
2009 Cadillac CTS-V
 

Page created in 0.143 seconds with 22 queries.