Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Twolanerider]

Bill....guess I'm heading off topic, so don't tell 2Lane, but those Jiffy stands really do rattle like crazy when the bumper falls off.  I lost so many that I used to carry a spare until I got tired of the game and put the last one on about a year ago with 5 minute epoxy.

I use the off-topic-marine-grade-silicone  [smiley=thumbsup.gif]

[WFP]

Is the spring loose enough that it's not tight and rattle free without the bumper?

Sorry Do,

It's early and I don't understand your question.  

I just rode up to the dealer last night and heard a clunk when hitting a bump.  When I got to the Dealer, I noticed I was missing the bumper.  I went to put the stand down, missed and it clanked back up.  That's what made me mention it.  Bought another while there and threw it on.  Hopefully it won't fall off before I get it home Saturday where I will add some sealant.

/Bill

[WFP]

Is the spring loose enough that it's not tight and rattle free without the bumper?

Without the bumper, there is metal to metal contact if that answers the question.

[Twolanerider]

Without the bumper, there is metal to metal contact if that answers the question.

Would bet that everyone has heard that particular clunk at one time or another.  I think I might have misunderstood your original post as well Bill.  Had thought you were describing it clunking or rattling anytime as opposed to just clunking when it banged against the frame as the stand was raised.  And with a spring that's not stretched out I thought it would be tight enough not to rattle when it was raised.

[BLM777]

So what should I be looking for on the belt guard?  It seems tight and not rubbing on the belt or anywhere else from what I can tell. [smiley=nixweiss.gif]

Belt tension needs to be checked with someone sitting on the bike in an upright position.  On the belt guard you'll see a little window with incremental marks.  Use a HD deflection tool or simply push up with about 10 lbs and see how far it deflects.  I think the book says 3/8".  I measure 1/4 or slightly over and let it go at that.  If it is slapping the belt guard, it will make quite a sharp almost metal to metal noise.  Good luck.....BY THE WAY...WHEN ARE WE GOING TO THE VALLEY?  Oooooop's..off topic!