Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Highjagger]

OK , thxs ,

@ guilty and all the other who have a ClearView GT small on their SERG ,
Do you have any front-end-wobbeling when you are very fast ( 170 km/h ) about 110 mph and leaning into a highway-curve with this shield mounted ?
 ( I have the WindVest 12" and it is getting very dangerous at 110+mph , front end wobbeling , i thnk this WV is much to straight up , i want to know whether the leaner angle of the CV GTs makes a better job in this situation )

[DW6019]

12" Windvest w/blacked pc mldg. Shield works good for me.

[charles05663]

Do you have any front-end-wobbeling when you are very fast ( 170 km/h ) about 110 mph and leaning into a highway-curve with this shield mounted ?
 ( I have the WindVest 12" and it is getting very dangerous at 110+mph , front end wobbeling , i thnk this WV is much to straight up , i want to know whether the leaner angle of the CV GTs makes a better job in this situation )

Ummm...no autobahns in Vermont. Only can hit 110 km/h legally here.  I am going to exercise my Maranda right -- you have the right to remain slient...

[Highjagger]

Ups , 110+ mph is a daily " must be " for this hell-machine , just to blow out the chit of the mufflers , HeheHe

[Guilty]

OK , thxs ,

@ guilty and all the other who have a ClearView GT small on their SERG ,
Do you have any front-end-wobbeling when you are very fast ( 170 km/h ) about 110 mph and leaning into a highway-curve with this shield mounted ?
 ( I have the WindVest 12" and it is getting very dangerous at 110+mph , front end wobbeling , i thnk this WV is much to straight up , i want to know whether the leaner angle of the CV GTs makes a better job in this situation )

No problems here, 110 mph is very stable, no wobble or anything unusual.

[Highjagger]

No problems here, 110 mph is very stable, no wobble or anything unusual.

Do you have two gaps besides the center screw ? I have .

[Guilty]

Do you have two gaps besides the center screw ? I have .

Yes, the center screw hole is a solid circle and the other screw holes have gaps (3/4 circle).

[sem_bunda]

I have two aftermarket screens.  The KW 8" looks great and is fine for around town, but awful on the road.  I had it on when I won a local bike show, looks pretty sharp.  The CB 14" is the one I use for road trips, and it is very much an improvement.  My wife is 5'8" and she likes it as a passenger too.  I am 5'11" with 33 inseam and the 14" is high enough to keep the buffetting off but low enough I can look over it if needed.  I got the dark grey and am very satisfied.  Easy on/off and the bolts they send with it are much better than the stock weanies they use.  If the pic does not post, email me at timaingram@hotmail.com and I will email them to you, both CB and KW pics.

[Bandit4142]

Ok, so here's my latest windshield....   Its a Cee Bailey's 16" Euro TRSSC in Dark Smoke.    Weird part is, I'm 5'9" with a 34" inseam, and I can see right over it, also the Dark smoke isn't that hard to see thru at night.   Just thought I'd throw some pictures out for you guys.         If these are too big, moderators feel free to resize.


Shot with HP PhotoSmart 315 at 2009-06-16


Shot with HP PhotoSmart 315 at 2009-06-16


Shot with HP PhotoSmart 315 at 2009-06-16

[Highjagger]

@Bandit ,
I can`t believe that this is a "Cee Bailey's 16" Euro TRSSC in Dark Smoke" .
 Or did they changed the molding to produce this shield ?
I had a Cee Bailey's 15" Euro TRSSC in Dark Smoke special edition for SERG on my bike ( it allready was the new one especially for the CVO Roadglide , but look at my pics , my shield was not lying in that flat lean angle than yours .
The shape on the sides was not so low as yours .

[Highjagger]

and my shield looked awful , yours looks good and flat and sporty .

[Highjagger]

@ Bandit again ,
 I checked again the CEEBaileys site and my guess :
 Yours is the shield for RoadGlide standard ( which looks pretty good and does work as you say )
Mine was the special for CVO Roadglide ( which looked awful and did not work for me )

And i saw that you have mounted yours by using the standard-gasket , not the SERG gasket , is that right ?
Do you have gaps between the fairing and the shield ? ( inner side of screw number 2 and 4 ? it looks like you would have them )
Did this gasket came with the shield ?
Does it fit ?

( Mine especially for SERG did fit with the SERG gasket )

[Bandit4142]

Highjagger, my shield is indeed the one for the 'standard' Road Glide, not the Serg.   I personally didn't care for the look of the SERG specific windshield either, but that's just me.   The weatherstrip is one that I had from my Clearview which is simply a small rubber bead, nothing fancy, but it does work.   There is a gap at the #2 & #4 screw, probably 1/8" to 5/32", but nothing that I found unacceptable.   The Cee Bailey's fits as well as my Clearview and my Klockwerks, if not better.   In terms of performance, just like everyone else has said, its better than my 12" Klockwerks, but not quite as good as my Clearview, with more wind noise and slighty more turbulence at my shoulders and sides.....   Its a pretty good balance of form vs. function.

[Highjagger]

Which CV do you have ?

[Highjagger]

12" Windvest w/blacked pc mldg. Shield works good for me.

And i guess that the gaps between the fairing and the shield ( inner side of screw 2 and 4 ) are closed or covered by using the trim , is that right ?