www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Just installed PC V on SE Fat Bob  (Read 2496 times)

0 Members and 1 Guest are viewing this topic.

harris48cars

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
Just installed PC V on SE Fat Bob
« on: April 03, 2009, 05:00:25 PM »
Major pain to install. Crisper throttle responce. Runs cooler (This was what I was after). Is the bike faster? I thought it was fast before and if it is faster, it isn't obvious to me. Only did 15 miles after install so I haven't got enough miles to determine if the gas mileage is worse. If it continues to run cool and I don't lose much in MPG, then I'm sold.
  Gary
Logged

harris48cars

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
Re: Just installed PC V on SE Fat Bob
« Reply #1 on: April 06, 2009, 02:15:03 AM »
I did 200 miles today and not only did I not lose any mileage, I gained 7 (45.3 MPG today on one tank ). Checked a second tank and got 42+ MPG. I could have equaled the 45.3 but I rode somewhat aggressively enjoying a great day and the PC V.
  Gary
Logged

harris48cars

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
Re: Just installed PC V on SE Fat Bob
« Reply #2 on: April 06, 2009, 02:16:26 AM »
Sorry. I forgot to mention the best MPG I got prior to the PC V was 38.5.
  Gary
Logged

2fatbob09

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 65
Re: Just installed PC V on SE Fat Bob
« Reply #3 on: April 06, 2009, 03:34:11 PM »
Interesting....keep us posted on any and all changes to that engine after mods.....good luck :)
Logged

Diamondback

  • Diamondback
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1176
Re: Just installed PC V on SE Fat Bob
« Reply #4 on: May 03, 2009, 08:14:04 AM »
 :huepfenjump3:

What pipes ae you running?
Logged
2010 FXDFSE2 CVO Fat Bob, V&H staggers, Windshield, saddle bags, passenger back rest. 

2011 CVO Ultra Glide, Progressive Monotubes, Ultra 944's, Power Vision, ceramic headpipes, Cellset, Cee Baileys 15" and Fullsac 1.75"
Former 2009 SE Ultra, Rineharts, Stage I, PC V with autotune non cat header pipe
Former 2007 SE Ultra, D&D, Stage I, TMAT Metzlers
Former 2006 Dragonfly Ultra
Former 1999 Road King

harris48cars

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
Re: Just installed PC V on SE Fat Bob
« Reply #5 on: May 03, 2009, 10:05:29 AM »
Rush 2.25 slipons. The PCV came "plug n play" from Fuelmoto and it is working great. 48.7 MPG on my last tank. That is with no playing and I stopped using 6th gear as much. I've been hitting 6th around 50 mph and the 110 seems to handle that fine. This last tank I didn't use 6th till 60 MPH and the mileage went up 3 or 4 MPG.
  Gary
Logged

Diamondback

  • Diamondback
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1176
Re: Just installed PC V on SE Fat Bob
« Reply #6 on: May 03, 2009, 04:18:55 PM »
Does the SE Fatbob come with the dreaded Cat as does the 09 SE touring models?

 :-\
Logged
2010 FXDFSE2 CVO Fat Bob, V&H staggers, Windshield, saddle bags, passenger back rest. 

2011 CVO Ultra Glide, Progressive Monotubes, Ultra 944's, Power Vision, ceramic headpipes, Cellset, Cee Baileys 15" and Fullsac 1.75"
Former 2009 SE Ultra, Rineharts, Stage I, PC V with autotune non cat header pipe
Former 2007 SE Ultra, D&D, Stage I, TMAT Metzlers
Former 2006 Dragonfly Ultra
Former 1999 Road King

harris48cars

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
Re: Just installed PC V on SE Fat Bob
« Reply #7 on: May 04, 2009, 10:02:59 AM »
Don't know why this can't be determined definitively. There are opinions both ways. This is for sure, there are no cats in the pipes as I have looked. Also the Rush pipes don't have cats built in. And lastly, if there are cats in the stock mufflers, it's irrelevant as they are now history. I suspect they are cat free.
  Gary
Logged

Diamondback

  • Diamondback
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1176
Re: Just installed PC V on SE Fat Bob
« Reply #8 on: May 04, 2009, 10:12:10 AM »

 8)

Thanks.  I too will remove the HD pipes and replace them with something else.
Logged
2010 FXDFSE2 CVO Fat Bob, V&H staggers, Windshield, saddle bags, passenger back rest. 

2011 CVO Ultra Glide, Progressive Monotubes, Ultra 944's, Power Vision, ceramic headpipes, Cellset, Cee Baileys 15" and Fullsac 1.75"
Former 2009 SE Ultra, Rineharts, Stage I, PC V with autotune non cat header pipe
Former 2007 SE Ultra, D&D, Stage I, TMAT Metzlers
Former 2006 Dragonfly Ultra
Former 1999 Road King

zrx4me

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: Just installed PC V on SE Fat Bob
« Reply #9 on: May 04, 2009, 03:38:45 PM »
the cat is in the oval section where the 2 headpipes merge.You can hear it clinking when you turn your bike off when its been running a bit.Some folks have drilled them out.Im deciding what to do soon as my rush 2.0's will be here wed.
Logged
'11 Fat Bob
'07 DRZ400SM
 

Page created in 0.125 seconds with 21 queries.