Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[clutch]

having problem removing them,,i have them loose but hardly any room between them and the frame to lift 1 and side it off,,i do have half the tank off and the other half loose and out of the way.

[grc]

having problem removing them,,i have them loose but hardly any room between them and the frame to lift 1 and side it off,,i do have half the tank off and the other half loose and out of the way.

I'm not certain I understand what your asking, so I'll make an assumption.  Are you trying to remove both the cover and the rocker housing at the same time?  If so, that won't work.  You have to remove the cover first, then the breather and rocker arms, then the housing.  Also, the cover and housing are thinner on one side and thicker on the other to allow dissassembly in the frame.  The cover has to come out the right (air cleaner) side due to this "wedge" fit, it won't go the other way.

Jerry