Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RandyLapp]

up2nogood22 I would recommend you check out FullSac Perfomance at www.fullcac.com I'm currnetly having there Stage 1 and stage 2 kits installed at my local dealer. Steve is very helpful. I was not happy with the perfomance either.

[easyrider9809]

up2nogood22 I would recommend you check out FullSac Perfomance at www.fullcac.com I'm currnetly having there Stage 1 and stage 2 kits installed at my local dealer. Steve is very helpful. I was not happy with the perfomance either.

Randy..........are you going to put in a thinner head gaskets (cometic .030) in combination with the andrews cams ??  I'm curious....What is a 4 degree gear ??...jeff

[BUNKERBEER]

No, one up... Never would ride like that with my O'l lady......

[up2nogood22]

up2nogood22 I would recommend you check out FullSac Perfomance

Thanks,  After I recover from sticker shock, I might add the Andrews 54 cams.  Are you happy now?

[FUZZNUTS]

No, one up... Never would ride like that with my O'l lady......

Yes, and after that day she'll never be with me when I'm second or third in line. I'll be in the back of the line with all the slow pokes. I still have the claw marks in my neck and sides from that ride. ..................Fuzz

[up2nogood22]

Slapped the Rinehart slip ons just now, sounds great and runs better.  Hope to install TTS by end of the week, then order the bit to drill out the Cat...

[Fireguy]

Do yourself a favor and either send your head pipe to fullsac or cut the whole cat out yourself. Don't just drill it.

[up2nogood22]

Do yourself a favor and either send your head pipe to fullsac or cut the whole cat out yourself. Don't just drill it.

I planned to use the 1.6 Core Bit I saw on the site, looked to do a pretty good job?

[easyrider9809]

I planned to use the 1.6 Core Bit I saw on the site, looked to do a pretty good job?

You won't be able to get it all out with just a core bit.  Take Fireguys advice....you'll be better off in the long run

[up2nogood22]

You won't be able to get it all out with just a core bit.  Take Fireguys advice....you'll be better off in the long run

Are people having issues with the drilled version?  I expect I'd go to Vance and Hines Power Duals  at some point anyway..

[Highwaystar]

Consider Jackpot headers and mufflers. http://fuelmotousa.com/home.htm

[easyrider9809]

Consider Jackpot headers and mufflers. http://fuelmotousa.com/home.htm

Highwaystar...........I think you had your jackpot header ceramic coated.  Being its of stainless steel construction, would it have to be ceramic coated ??

[8 U UP]

Find a 96" head pipe from a friend or ask your dealer for some names of people that just changed pipes and offer them 50-100 bucks.

[up2nogood22]

Consider Jackpot headers and mufflers. http://fuelmotousa.com/home.htm

Those look good.  Look to be 1.75 inch as well?

[North Star]

Those look good.  Look to be 1.75 inch as well?

not sure how much the Jackpot header is, but if you were going to get it ceramic coated, why not just get the fullsac x pipe, which is the same design, but already comes ceramic coated?