Topic: Re: ECM download (Read 1919 times)

JCZ · « **on:** April 25, 2004, 10:37:56 AM »

Quote

Hey guys, got to ask you a question about the ecm. Dealer thought he was doing me a favor and installed the stage 1 kit I bought when I got the bike and reflashed me to a stage 1 download ( real bright) . After I got the bike home , I realized this and went to the local dealer( much closer ) and they reflashed me to stage 2 id # 32860-02a on cartrige # 32083-01a. I have a slight ping when fully warmed up just starting off from a stop (low rpm's). Prior to this "a" flash , I had the # 32083-01 download but thought the "latest A " would be better and ended up with this pinging. They want to download the latest flash for this motor but it is for the motor with heads which I do not have, Could I hear some opinions here?

h2oski · « **Reply #1 on:** April 26, 2004, 03:38:23 PM »

I would get it reflashed with the correct program immediately before you do any damage to your engine.

kng103 · « **Reply #2 on:** April 26, 2004, 09:01:42 PM »

thought some of you might find this interesting.
http://mysite.freeserve.com/H.H._M_bulletins/M1134.pdf

dyno · « **Reply #3 on:** June 06, 2004, 01:38:16 PM »

TO DO THIS RIGHT GET A LOAD MAP DONE, REALLY NOTHING COMES CLOSE. A FLASH PUTS FUEL EVERYWHERE. YOU CANT PUT FUEL IF YOU CANT SEE IT A LOAD DYNO MAP ALLOWES YOU TO DO THIS AND TAKE AWAY TIMING WHERE ITS NEEDED ALSO FINAL HP & GAS MILEAGE WILL BE BETTER THAN A FLASH......... MRD.

Author Topic: Re: ECM download (Read 1919 times)