Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Boatman]

Just looked at all 13 pages here - did I miss how the side lights are getting an increased brightness?
I did read somewhere here that the leads were reversed to get the brighter light, but LED's don't work that way, so is there actually a second set of LED's in the strip?

The increase in brightness so the end lights can be brake lights or turnsignals is done by the module.
There is not a 2nd set of led's in the lights..   Works great.   Feel like a Winger.  Lit up nice from the back.

If you have non led corner lights in the tourpack, the kit you get from Harley has light sockets for each end light to make them double filament.

Hope this helps.

[porthole]

I have the LED light bar for my king tourpak Bob.
Just confused as to how the lights are brighter. Is the module increasing the voltage? And if so how?

[Boatman]

I have the LED light bar for my king tourpak Bob.
Just confused as to how the lights are brighter. Is the module increasing the voltage? And if so how?

Duane-

I don't know how the module increases the brightness of the led's for brake/turn.  I do know that my rh and lh end lights are very bright when the brake is applied or the turnsignals are on.  Easily seen from behind on sunny days for turn/brake.   They just work.  Bob

[muddypaws]

Has anyone used the Magic-TCP module to get the tour pack lights to act as turn signals?

[muddypaws]

Anyone tried this?
http://www.ridetimetechnology.com/tp_seultra.htm

[ThunderBueller]

Anyone tried this?
http://www.ridetimetechnology.com/tp_seultra.htm

Yep. Works great. 

[muddypaws]

Any big deal to install? I should have my part by tomorrow.

[ThunderBueller]

Any big deal to install? I should have my part by tomorrow.

Nope, piece of cake.

[danner55]

Which module did you go with? Turn SE or TurnSE+ & are you happy with the ease of installation & does it do what it is suppose to do as run\brake\turn signal?

Thanks

[muddypaws]

I'm still waiting for my part.

[darth davidson]

I bought JDOFLHRIDER parts. Worked just fine on mu FLTRUSE !!!!!

[JDOFLHRIDER]

I'm still waiting for my part.

From where I'm not making them unless harley back order gets to bad.

[muddypaws]

Got the part and took about 30 minutes to install. Works great.

[gg]

Please humor me. I just ordered the toupak to match my 2011 CVO SESG and want to add the LED tailight kit sold by HD.
It's my understanding that all I need is the HD kit #67931-11 and a primed lamp housing from the 2011 CVU Ultra Classic to have a less housing wrapping the side of the TP.
Does this sound right?
I looked at the 2011 CVO Ultra Classic parts book and the LED llamp units for the TP are not the same as the LED Light kit. Is that going to make a difference?
Thanks 

[muddypaws]

I used the ridetime stuff not the HD stuff and it works great.