last batch shipped and couple ready,,,jdo
JDO, need a little help with what might be a somewhat unique situation on my 2010 SEUC. First, my TP is detachable. Second, I'm already running Badlands RUN/BRAKE/TURN 8-pin Illuminator module with LED turn signals at all 4 corners. I would like to make my TP corner LEDs into RUN/TURN signals as well.
My TP is detachable with 5 plugs.
*Left & Right antenna connections that let me move the antennas from the TP down to Antenna connections between the saddlebags and spacers for riding without the TP. These are obviously not impacted.
*Left & Right Speaker connectors for disconnecting the rear speakers when the TP is removed, not impacted.
*And lastly, a single plug my dealer made that connects to enable the rear LED on the TP, the led lighting inside the TP, the left & right LEDs above the saddlebags and the 12v plug inside the TP.
Will your adapter be compatible with my setup? How will your adapter work with the Badlands module that I'm already using to convert my existing rear turn signals into LED RUN/BRAKE/TURN signals. Will the LEDs on the TP function the same as the existing rear LED turn signals. If your adapter would allow the LEDs on the TP to function exactly the same as my existing rear LEDs, please sign me up for an adapter today.
BTW, the Badlands module allows all of my exisiting LED turn signals to also function as 4-way flashers and they can be run with the engine on or off and can never overheat. It would be fantastic if the Badlands module could also be used with your adapter to enable the TP corner LEDs to also function as 4-way flashers.
Please let me know what you think is possible with my set-up.