Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DesertRat]

Need some advice.
I get shoulder and neck pain due to handle bar position on long rides.

I want to buy some riser that have a pull back of 3 to 4 inches.
I want to use the stock bars, so I need a 1 1/2 inch riser about 5 1/2 inches high.

Has anybody found a set of risers that will work?
From what company?

[hogasm]

Need some advice.
I get shoulder and neck pain due to handle bar position on long rides.

I want to buy some riser that have a pull back of 3 to 4 inches.
I want to use the stock bars, so I need a 1 1/2 inch riser about 5 1/2 inches high.

Has anybody found a set of risers that will work?
From what company?

Did you ever find any risers or bars that worked?

[DesertRat]

Hello
Yes I did find a pair of risers from LA Chopper 5.5 rise, for 1 1/4" bar, has a 1 5/8" pullback Part #0602-0176.
They are OK but expensive.
I see that some of the 09 CVOs now have a different bar which solves this problem.

If I were to do it again, I would buy a intergrated riser & bar.  It gives a better look and is the same price or cheaper.

Love my Bob, it gets better with every mile. 

Hope this helps.

[kcluke40]

Do have any pics of your bike that you could share showing your new risers installed?

[DesertRat]

Do have any pics of your bike that you could share showing your new risers installed?

See attached pictures of the Bob with the new swept back risers.