Topic: Suspension for CD changer (Read 1938 times)

arcticdude · « **on:** May 14, 2006, 10:34:06 PM »

I took the wife's CD changer apart (out of her SERG) this evening. It's got 4 vibration dampners that are a flexible "pod" filled with a thick dampning fluid type stuff. It's only got 2 true springs, one on each side. Three of the 4 pods were split open and one of the springs was broken. Has anybody found a source for these pods?? The spring I think I can find locally. I'll bet every CD changer out there designed for vehicle use has these pods. Any ideas??

arcticdude · « **Reply #1 on:** May 15, 2006, 10:23:11 PM »

Just an update, I've figured out the changer is probably a JVC model CH-X**** series. They all appear to be similar, except for cosmetics. If anybody has a good JVC source, let me know.

naitram · « **Reply #2 on:** May 16, 2006, 08:09:33 AM »

are you looking for a working unit or just parts?

search "jvc changer" on ebay motors

arcticdude · « **Reply #3 on:** May 16, 2006, 06:17:57 PM »

I'd like to get just parts, but that may be tougher than it's worth. The used unit route may be the easiest way to go, but having new vibration dampeners would be better. They are definitely a life span limited product.

naitram · « **Reply #4 on:** May 16, 2006, 07:58:42 PM »

may want to try and contact JVC and see if they send you the dampeners

Author Topic: Suspension for CD changer (Read 1938 times)

arcticdude

Suspension for CD changer

arcticdude

Re: Suspension for CD changer

naitram

Re: Suspension for CD changer

arcticdude

Re: Suspension for CD changer

naitram

Re: Suspension for CD changer