Topic: First Oil Change For Me! (Read 1750 times)

Canuck · « **on:** May 18, 2006, 01:43:00 AM »

Hey guy's,
I need some advice if you don't mind. This is the first time I have changed my own fluids on the SEUC. Does anyone know the actual capacity for oil on this bike? Manuel say's 3.3 litres but I think this is too low. Also, now that I have put a Baker DD6 on the bike, is it still 24oz's just like the manuel say's for the stock 5 speed? One last question: I added the 950 ml to the Primary Inspection Case just like the manuel says. How do I check to see if this is enough? Does the oil from the main oil filler make its way into the Primary? This was a tough job for me especially without a lift. I am going to put Redline in the tranny because this is what I believe Freedom put into it when they installed it. Is this ok?
Thanks for the help
Canuck

hd-dude · « **Reply #1 on:** May 18, 2006, 01:56:14 AM »

Oil is 4 quarts
Tranny should be similiar to stock (24oz) I usually add 22 then check it
The primary you need to fill it to the bottom of the clutch spring. Usually about 1 quart.

Canuck · « **Reply #2 on:** May 18, 2006, 08:20:03 PM »

Thanks Jim, appreciate the help.
Canuck

Author Topic: First Oil Change For Me! (Read 1750 times)

Canuck

First Oil Change For Me!

hd-dude

Re: First Oil Change For Me!

Canuck

Re: First Oil Change For Me!